4606
Aircraft Modeling / Re: April Group Build--F4U Corsair
« on: April 18, 2011, 08:13:47 PM »
Love it! 
News:
Forum is closed for new members. All content is private and can not be shared
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
4607
Aircraft Modeling / Re: F-106 Delta Dart
« on: April 18, 2011, 08:46:40 AM »
Ah yes...... our stores stock "white" and "cider" vinegar. I'll give it a try!
4608
Aircraft Modeling / Re: Curtiss-Wright CW-21B
« on: April 18, 2011, 08:45:06 AM »
Thanks, friends.
I still need to install the propeller governor on the engine. I totally forgot to do that earlier but it is easily done after painting.
I did more and more research on the paint scheme and finally satisfied myself that the underside is aluminum lacquer on the original. I had many doubts but find several sources, including the IPMS Stockholm lists that I frequently study, that show a silver belly with Medium and Olive green upper surfaces. Opinions?
I still need to install the propeller governor on the engine. I totally forgot to do that earlier but it is easily done after painting.
I did more and more research on the paint scheme and finally satisfied myself that the underside is aluminum lacquer on the original. I had many doubts but find several sources, including the IPMS Stockholm lists that I frequently study, that show a silver belly with Medium and Olive green upper surfaces. Opinions?
4609
Aircraft Modeling / Re: F-106 Delta Dart
« on: April 18, 2011, 08:40:31 AM »If I see correctly, there are recessed panels, so decal setting solution sounds a real need for the decal to be perfectly fitted...
Monogram accurately molded a seam down the length of the external tanks. I tried the decal on this tank to see if there would be any problem. I'll need to use setting solution to get the results I want--it didn't lay down very tightly. Not a big problem to wait for some Microsol and Microset as I have the other projects going anyway.
I may try the alcohol/vinegar method. What ratio should I mix them? 1/1 or ?
4610
Aircraft Modeling / Re: Curtiss-Wright CW-21B
« on: April 18, 2011, 08:20:48 AM »
The Curtiss is ready for paint finally. During the process I decided I wanted an open canopy so I vacuformed the original for "insurance". I've had problems in the past breaking plexiglas when cutting it with my razor saw and wanted a backup canopy just in case. As it turned out I did crack the sliding portion of the original so I'll be using the copy.
Here's the finished engine just before installation in the airplane. The ignition leads are sticking out above each cylinder head because I'm lazy and you can't see them with the cowling on anyway.....
I had to hang the prop and spinner temporarily before painting so I could stare at that huge engine on the tiny airframe.
Here's the finished engine just before installation in the airplane. The ignition leads are sticking out above each cylinder head because I'm lazy and you can't see them with the cowling on anyway.....
I had to hang the prop and spinner temporarily before painting so I could stare at that huge engine on the tiny airframe.
4611
Aircraft Modeling / Re: F-106 Delta Dart
« on: April 18, 2011, 08:12:55 AM »
First decal went on this evening. I can't find my decal setting solution anywhere 
so I'm going to hold off until I resupply.
so I'm going to hold off until I resupply.
4612
Aircraft Modeling / Re: April Group Build--F4U Corsair
« on: April 17, 2011, 04:42:41 PM »
Excellent results once again!
4613
Aircraft Modeling / Re: Curtiss-Wright CW-21B
« on: April 17, 2011, 04:38:42 PM »
I can help with an engine, propeller and spinner--just say the word and I'll get a set made up! Also, look in your spares box for some P-40 or similar tires as they are very close to the CW-21s. I'm thinking about turning the landing gear legs from aluminum on my lathe if I can't make these work and I can easily make you a set also.
4614
Aircraft Modeling / Re: April Group Build--F4U Corsair
« on: April 17, 2011, 08:21:49 AM »
Your three-color scheme is looking nice, No.1
I started the decaling on my FAA machine tonight. This is quite an experiment as I am using the original kit decals that came with the Otaki model in the 1970s. These three roundels worked perfectly with a long time spent soaking in water. They even snuggled down nicely to the detail on the surfaces. I was actually rather amazed at how nice they are going on. I did run into a problem with the first fin flash that I tried as it started to break up around the edges a bit. I have several sheets so it isn't going to be a problem. I'll just clearcoat the rest of the decals before trying to apply them.
I started the decaling on my FAA machine tonight. This is quite an experiment as I am using the original kit decals that came with the Otaki model in the 1970s. These three roundels worked perfectly with a long time spent soaking in water. They even snuggled down nicely to the detail on the surfaces. I was actually rather amazed at how nice they are going on. I did run into a problem with the first fin flash that I tried as it started to break up around the edges a bit. I have several sheets so it isn't going to be a problem. I'll just clearcoat the rest of the decals before trying to apply them.
4615
Aircraft Modeling / Re: Curtiss-Wright CW-21B
« on: April 17, 2011, 08:17:17 AM »
This evening I sat down to assemble this little fighter. The person who originally started the build had already installed the photoetched cockpit details and painted both sides of the fuselage, so all that remained for me to do was to fit everything up and glue the pieces together.
If anyone finds one of these little kits for sale it is a rather fun build. It needs a little detailing here and there but is still much easier than the typical vacuform or other short-run injection model.
If anyone finds one of these little kits for sale it is a rather fun build. It needs a little detailing here and there but is still much easier than the typical vacuform or other short-run injection model.
4616
Warplane Art / Re: Libyan warplane
« on: April 16, 2011, 05:39:53 PM »
I'm with Sall-that camouflage scheme is very nice and a good modeling subject. Thanks for the photos, Fishbed!
Neat subject matter, No.1.
Neat subject matter, No.1.
4617
Aircraft Modeling / Re: April Group Build--F4U Corsair
« on: April 16, 2011, 08:15:29 AM »
Big Hog is a great paint scheme to pick for your airplane. 
I really like the three-color camouflage a lot. I might just have to build another Corsair so I can do a Marine Corps example.
I really like the three-color camouflage a lot. I might just have to build another Corsair so I can do a Marine Corps example.
4618
Aircraft Modeling / Re: Curtiss-Wright CW-21B
« on: April 15, 2011, 06:44:40 PM »
I couldn't mow the lawn this morning because of weather so I started cleaning up the engine and prop I cast. First the propeller had to be shortened considerably to get the correct diameter for the little Interceptor and this gives it the correct "paddle blade" profile also:
The prior owner didn't do such a great job joining the wing sections so I am drinking coffee and reworking these areas right now. Too bad I have to go to work this afternoon or this project could be very far along by tonight!
The prior owner didn't do such a great job joining the wing sections so I am drinking coffee and reworking these areas right now. Too bad I have to go to work this afternoon or this project could be very far along by tonight!
4619
Forums Works / Re: Group builds
« on: April 15, 2011, 04:35:07 PM »
I like the Ground Forces idea also. I may have to do a restoration for the first project there as my supply of MVs is pretty slim (and I'm not ready to start on that bomb truck just yet).
As far as the Japan-Build, why don't we let that be an "open-ended" thread as Srecko mentioned earlier. That way everyone who wants to contribute, but doesn't have room on the bench now, can do so later.
September is great for me and the Falco. I am in for the Me 262 also as I have both a Monogram and Tamiya 1/48 version.
As far as the Japan-Build, why don't we let that be an "open-ended" thread as Srecko mentioned earlier. That way everyone who wants to contribute, but doesn't have room on the bench now, can do so later.
September is great for me and the Falco. I am in for the Me 262 also as I have both a Monogram and Tamiya 1/48 version.
4620
Aircraft Modeling / Re: AIRCO DH.2 (Eduard 1/48)
« on: April 15, 2011, 04:25:23 PM »
Very nice! The bracing cables are a work of art in themselves.