Author Topic: Republic XF-91 Thunderceptor  (Read 10159 times)

Offline Jicehem

  • Full Member
  • ***
  • Posts: 1313
    • View Profile
Republic XF-91 Thunderceptor
« on: September 08, 2008, 05:47:24 PM »
This is the very old Lindberg's kit issued in the early 1950s...
Two kits have been necessary to improve accuracy and to modify into the Butterfly Tail model.

Bare metal finish has been obtained thanks to Humbrol "Polished aluminium" itself polished with aluminium powder.

http://i81.photobucket.com/albums/j215/jicehem/RepublicXF-91Thunderceptor_Linbe-2.jpg
Republic XF-91 Thunderceptor


http://i81.photobucket.com/albums/j215/jicehem/RepublicXF-91Thunderceptor_Linbe-1.jpg
Republic XF-91 Thunderceptor


http://i81.photobucket.com/albums/j215/jicehem/RepublicXF-91Thunderceptor_Linberg4.jpg
Republic XF-91 Thunderceptor


Cheers,
Jicehem


samuraj77

  • Guest
Re: Republic XF-91 Thunderceptor
« Reply #1 on: September 08, 2008, 05:56:29 PM »
Looks great...
NMF is outstanding  :-clap
Thanks for posting  :-ok

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23092
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Republic XF-91 Thunderceptor
« Reply #2 on: September 08, 2008, 06:08:17 PM »
This is more then excellent work on surface!

Letipapa

  • Guest
Re: Republic XF-91 Thunderceptor
« Reply #3 on: September 08, 2008, 11:39:42 PM »
What a strange wings. Jicehem  :-salut  :-clap :-clap :-clap :-clap :-wave


Offline santynus

  • Full Member
  • ***
  • Posts: 1385
  • http://www.fw190.altervista.org
    • View Profile
    • focke-wulf Fw190 & other aircraft
Re: Republic XF-91 Thunderceptor
« Reply #4 on: September 09, 2008, 01:56:02 PM »
very nice model  :-ok :-clap :-wave

Offline Jicehem

  • Full Member
  • ***
  • Posts: 1313
    • View Profile
Re: Republic XF-91 Thunderceptor
« Reply #5 on: September 09, 2008, 04:59:17 PM »
What a strange wings. Jicehem  :-salut  :-clap :-clap :-clap :-clap :-wave



Hi,

Yes, the 35 degree swept-wing could be adjusted to vary in incidence to the most effective angle for take-off, landing or cruise.
But, the most novel was the inverse-taper configuration in which the thickest and widest portion of the wing was at the tip instead of next to the fuselage... This provided greater lift outboard and, with leading edge lats, reduced the tendency of the wingtips to stall at low speeds. Since the wing was too thin inboard to receive the main landing gear, these units were retracted outward to fit into the thickened tips. (From US Fighters_Aero-Publisher_1975)

Cheers,
Jicehem

Letipapa

  • Guest
Re: Republic XF-91 Thunderceptor
« Reply #6 on: September 09, 2008, 06:17:10 PM »
So unusual. :-eek