Author Topic: Group Build> Japan  (Read 92888 times)

Profa

  • Guest
Re: Group Build> Japan
« Reply #60 on: May 08, 2011, 09:29:17 PM »
@Daniel: It's interesting that you mentioned you'd have to correct the fuselage shape - it would sure require quite a correction to make it right :)) Joke aside, this will surely look nice, as the work in progress shows :-ok
@Scott: this refurbishing looks promising, and original cockpit details are prominent enough :-ok

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Group Build> Japan
« Reply #61 on: May 09, 2011, 12:16:49 PM »
Well yes Profa, correction were needed, but with putty. For fun I could have made the rivets, but too hard work just for fun...

Anyway, sanding is made. Now the parts are ready for painting.

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Group Build> Japan
« Reply #62 on: May 09, 2011, 12:19:37 PM »
I gived also a little bath to the canopy: I put it into Klir (Future is also good, Scott). Then I removed it.

Why to do that?

1) the canopy is more clear
2) the eventuals marks made by sanding, etc, disappear
3) you can use cyano without any risk that fume will cause any damage thanks to the protection gived by Klir.

Offline Sall

  • Sr. Member
  • ****
  • Posts: 4641
  • Build what YOU want,the way YOU want to,and above all-have fun!
    • View Profile
Re: Group Build> Japan
« Reply #63 on: May 09, 2011, 12:30:55 PM »
 :-clap :-clap

Offline Second Air Force

  • Moderator
  • Hero Member
  • *****
  • Posts: 5777
    • View Profile
Re: Group Build> Japan
« Reply #64 on: May 09, 2011, 04:16:11 PM »
Great progress!!!!!!

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Group Build> Japan
« Reply #65 on: May 10, 2011, 03:26:15 PM »
"White day" today: primer airbrushed...

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23156
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Group Build> Japan
« Reply #66 on: May 10, 2011, 04:18:37 PM »
:-ok Nice mate  :-clap On my side is still far from paint but kit is in good final assembly steps.

Offline Sall

  • Sr. Member
  • ****
  • Posts: 4641
  • Build what YOU want,the way YOU want to,and above all-have fun!
    • View Profile
Re: Group Build> Japan
« Reply #67 on: May 10, 2011, 04:33:23 PM »
Nice mate!  :-clap

Offline Second Air Force

  • Moderator
  • Hero Member
  • *****
  • Posts: 5777
    • View Profile
Re: Group Build> Japan
« Reply #68 on: May 10, 2011, 08:26:16 PM »
Good progress!

Here's the first part of my next Japanese project. More later......
http://i174.photobucket.com/albums/w117/2AF/IMG_6940.jpg
Group Build> Japan

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Group Build> Japan
« Reply #69 on: May 10, 2011, 09:50:56 PM »
My last work today: preparing the tortoise... errrr.... the canopy with masking tape

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23156
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Group Build> Japan
« Reply #70 on: May 10, 2011, 10:54:24 PM »
:))

Offline javier_planells

  • Beginner
  • *
  • Posts: 144
  • "Words will always retain their power."
    • View Profile
    • The Modeling Underdog - A haven of bad taste for the faint hearted.
Re: Group Build> Japan
« Reply #71 on: May 13, 2011, 02:07:30 AM »
May be I'm cheating a little bit for it's already built, but I wanted to share some more J-modeling with you guys after being away so much time. This japanese DC-3, or L2D2 "Tabby" was built some 8 years ago. And then people wonders about how fast time goes by...

http://themodelingunderdog.blogspot.com/2008/06/dc-3-with-twist-part-1.html

http://themodelingunderdog.blogspot.com/2008/06/dc-3-with-twist-part-2.html

http://themodelingunderdog.blogspot.com/2008/06/dc-3-with-twist-part-3-and-grand-finale.html

I have an AZ Model Nakajima Type 91-I in Kwangsi markings waiting to be built. May be I'll start it before the GB is closed, but it has so many tiny, minuscule PE parts that I'm sure I'll still have it on the workbench next year :-wise

Hope you like this unusual Douglas, and keep up the good work!
Javier Planells
"Do you know what Nemesis means? It is a righteous infliction of retribution manifested by an appropriate agent, personified in this case by a horrible bastard, ME."

Offline Second Air Force

  • Moderator
  • Hero Member
  • *****
  • Posts: 5777
    • View Profile
Re: Group Build> Japan
« Reply #72 on: May 13, 2011, 05:15:07 AM »
We're traveling right now but I brought my "Japan Project #2" along on the trip. Tonight I assembled the major components together for a test-fit.
http://i174.photobucket.com/albums/w117/2AF/IMG_6942.jpg
Group Build> Japan


Here is the beginning stage of the cowling/engine/propeller mods that I'm making to the kit.
http://i174.photobucket.com/albums/w117/2AF/IMG_6944.jpg
Group Build> Japan


Perhaps another update tomorrow evening from another location!
Scott

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23156
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Group Build> Japan
« Reply #73 on: May 13, 2011, 06:44:57 AM »
Interesting link Javier ;) Japan Project-2 sound promising mate :)

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Group Build> Japan
« Reply #74 on: May 13, 2011, 07:10:38 AM »
+1 with No.1