« previous next »
Pages: [1]   Go Down

Author Topic: Adaptation of the 1/144 JUMO from RetroWings for Trumpeter kit  (Read 8653 times)

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Adaptation of the 1/144 JUMO from RetroWings for Trumpeter kit
« on: September 17, 2011, 07:36:13 PM »
I've presented you the very nice Jumo from Retrowings, made for the Eduard 1/144 Me 262 kit. In my article in the first Warplane magazine, I said that for me it was possible to adapt that engine for the Trumpeter kit.

I've started the work...

First two photos to remind you the Retrowings engine. Third one: in red, the element of the Trumpeter engine that will be kept and adapted on the Jumo. I've glued the two half engines, and cut that part that I've glued on the resin engine.
4th, 5th & 6th photos: the new "Trumpeter-Jumo", with miliput (that needs some sanding of course)
Last photo: the adapted engine fits nicely on Trumpeter kit.

Now I have to sand the miliput correctly.

After that I will send the engine to Dominique Jadoul, as a master for duplication...
Logged

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23093
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Adaptation of the 1/144 JUMO from RetroWings for Trumpeter kit
« Reply #1 on: September 17, 2011, 08:40:33 PM »
So small, job for craftsman :))
Logged

Offline Second Air Force

  • Moderator
  • Hero Member
  • *****
  • Posts: 5775
    • View Profile
Re: Adaptation of the 1/144 JUMO from RetroWings for Trumpeter kit
« Reply #2 on: September 17, 2011, 10:27:16 PM »
A job for a jeweler! Great update on this project.
Logged

Offline Sall

  • Sr. Member
  • ****
  • Posts: 4641
  • Build what YOU want,the way YOU want to,and above all-have fun!
    • View Profile
Re: Adaptation of the 1/144 JUMO from RetroWings for Trumpeter kit
« Reply #3 on: September 18, 2011, 12:58:33 AM »
 :)) Excellent stuff! :-eek
Logged

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23093
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Adaptation of the 1/144 JUMO from RetroWings for Trumpeter kit
« Reply #4 on: September 18, 2011, 07:08:30 AM »
Maybe this could be of some help ;)
Logged

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Adaptation of the 1/144 JUMO from RetroWings for Trumpeter kit
« Reply #5 on: September 18, 2011, 08:43:02 AM »
Thank you mates, and thank you Srecko for the photos! Will be of course very useful... ;)
Logged

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23093
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Adaptation of the 1/144 JUMO from RetroWings for Trumpeter kit
« Reply #6 on: September 18, 2011, 08:46:45 AM »
You are welcome :))
Logged

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Adaptation of the 1/144 JUMO from RetroWings for Trumpeter kit
« Reply #7 on: September 18, 2011, 11:27:29 AM »
FINISHED!!!

I've carefully sanded the miliput, and replaced a cable that was broken in the process.

As you can see, fitting is good. Now I will send that engine to Domi, awaiting his comments...
Logged

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23093
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Adaptation of the 1/144 JUMO from RetroWings for Trumpeter kit
« Reply #8 on: September 18, 2011, 11:32:20 AM »
Good installation mate :-clap
Logged

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Adaptation of the 1/144 JUMO from RetroWings for Trumpeter kit
« Reply #9 on: September 18, 2011, 11:40:19 AM »
Thank you! ;)
Logged

Offline Sall

  • Sr. Member
  • ****
  • Posts: 4641
  • Build what YOU want,the way YOU want to,and above all-have fun!
    • View Profile
Re: Adaptation of the 1/144 JUMO from RetroWings for Trumpeter kit
« Reply #10 on: September 18, 2011, 12:01:49 PM »
Excellent job on this very small engine. :-clap :-clap
Logged

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Adaptation of the 1/144 JUMO from RetroWings for Trumpeter kit
« Reply #11 on: November 30, 2011, 10:00:15 PM »
Well guys, I'm proud to present you the resin part made from the master...  :-joke

Now, time to build my 1/144 Me262!!!
Logged

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23093
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Adaptation of the 1/144 JUMO from RetroWings for Trumpeter kit
« Reply #12 on: November 30, 2011, 10:05:31 PM »
Let's go :-ok
Logged

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Adaptation of the 1/144 JUMO from RetroWings for Trumpeter kit
« Reply #13 on: November 30, 2011, 10:08:35 PM »
;)
Logged

Offline Sall

  • Sr. Member
  • ****
  • Posts: 4641
  • Build what YOU want,the way YOU want to,and above all-have fun!
    • View Profile
Re: Adaptation of the 1/144 JUMO from RetroWings for Trumpeter kit
« Reply #14 on: November 30, 2011, 10:10:59 PM »
 :-ok
Logged
Pages: [1]   Go Up
« previous next »