Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - draken35

Pages: 1 [2] 3 4 ... 501
16
Aircraft Modeling / Re: SPAD 510 (FRROM 1/72)
« on: October 26, 2022, 03:37:31 PM »
After that, MIG pigments "black smoke" on the exhausts

17
Aircraft Modeling / Re: SPAD 510 (FRROM 1/72)
« on: October 26, 2022, 03:36:49 PM »
I've also placed the machineguns under the wings; the windshield and the visor

18
Aircraft Modeling / Re: Chibi F-104G
« on: October 22, 2022, 09:37:29 AM »
My friend Dominique Jadoul sculpted me an humoristic Belgian pilot to be presented with the cute 104, having in hands Belgian fries and some good beers (Chimay bleue).

Face painted with the oil set "Humlan flesh" from Abteilung 502 ; the suit painted with AK Acrylic 3D AK11177 Ducat Blue as a base

19
Aircraft Modeling / Re: SPAD 510 (FRROM 1/72)
« on: October 22, 2022, 09:15:28 AM »
Taking into account your comments I was wondering how to limit the glossy effect oif my paint.
Best way I've found is to use MIG P036 Green Fading pigments. Result is better than what the photo shows

20
Aircraft Modeling / Re: KDA-1 (Q-2A) Firebee (ICM 1/48)
« on: October 22, 2022, 09:09:30 AM »
Well, I had big trouble trying to correct the paint on the wing tanks, with the masking tape that didn't remain in place... That was so bothering that I decided to make another deco : this will be a Navy one now !

21
Aircraft Modeling / Re: SPAD 510 (FRROM 1/72)
« on: October 20, 2022, 06:58:47 AM »
Thank you for your comments mates

22
Aircraft Modeling / Re: Grumman Wildcat, Eduard 1/48 82201
« on: October 20, 2022, 06:57:13 AM »
Nice progress my friend

23
Aircraft Modeling / Re: SPAD 510 (FRROM 1/72)
« on: October 19, 2022, 04:21:17 PM »
Thank you mate !

I've airbrushed gloss varnish again to seal the decals ; then I've used Tamiya Black Panel Liner. The headrest of the pilot is paintbrusehd in AK Acrylic 3D AK11102 Deep Brown and the exhaust pipes in AK Acrylic 3D Dark Rust.

To be precised that the aircraft will have a glossy finish.

24
Aircraft Modeling / Re: Grumman Wildcat, Eduard 1/48 82201
« on: October 19, 2022, 04:17:45 PM »
:-ok

25
Aircraft Modeling / Re: SPAD 510 (FRROM 1/72)
« on: October 11, 2022, 01:47:38 PM »
Thank you my friend !

26
Aircraft Modeling / Re: SPAD 510 (FRROM 1/72)
« on: October 11, 2022, 12:55:45 PM »
I've airbrushed Gauzy Agent from AK as gloss varnish ; then decals were applied in one sitting  :-green
Excellent decals I must say.

27
Aircraft Modeling / Re: KDA-1 (Q-2A) Firebee (ICM 1/48)
« on: October 07, 2022, 01:04:23 PM »
Time to resume this one too !

Painting : white is Tamiya XF-1 ; red is Signal Red from AK Real Colors

28
Aircraft Modeling / Re: SPAD 510 (FRROM 1/72)
« on: October 03, 2022, 05:12:17 PM »
Well,  I've just followed the instructions from FRROM...

29
Aircraft Modeling / Re: SPAD 510 (FRROM 1/72)
« on: October 03, 2022, 02:40:55 PM »
After that, the fuselage received Vallejo Metal Aluminium. The undersurfaces of the wings were painted with Gunze H8 ; then the tail with AK RC Signal Red and finally the upper surfaces of the fuselage & the wings, plus the struts were painted khaki (70% Gunze H81 + 30% Gunze H305)

30
Aircraft Modeling / Re: SPAD 510 (FRROM 1/72)
« on: October 03, 2022, 02:37:53 PM »
Thank you mate !

Well, I've continued to work on my SPAD but did not posted photos... Here there are.

First, black base

Pages: 1 [2] 3 4 ... 501