Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - modellius

Pages: [1] 2 3 ... 159
Ground Forces / Re: TAM 4500 DV
« on: January 31, 2023, 12:39:03 AM »
Thank you friends !

The chassis had it basic paint, there was two types of painting on these trucks. There was military olive and black, this time I go with the black to made a little contrast on this vehicle. Exhaust paint and weathering is still to come. The cab is completed, painted and weathered, assembly is the next step

Aircraft Modeling / Re: Farewell Mirage 5BD (1/72)
« on: January 31, 2023, 12:33:03 AM »
Excellent mate !

Aircraft Modeling / Re: Tornado IDS Eduard
« on: January 31, 2023, 12:32:39 AM »
Looks good !

Aircraft Modeling / Re: Ju 87
« on: January 27, 2023, 08:52:40 PM »
I have seen its remains in Museum depots, top coat was Soviet fighter grey paint.

That was my guess, thank you mate to make me sure !

Aircraft Modeling / Re: Ju 87
« on: January 27, 2023, 07:51:26 PM »
Yes, red star on white base, Yugoslav flag on tail and overpainted 5B ER, the latest partisan Stuka paint scheme, after this it had painted in total with the new insignia....

Aircraft Modeling / Re: Ju 87
« on: January 27, 2023, 02:09:29 PM »
Picture from the book, Boris Ciglić provided the picture for the book, the ladders are visible it is a poor picture I don't have a scanner....

Aircraft Modeling / Re: Ju 87
« on: January 20, 2023, 07:44:32 PM »
You have a photo of this ladders?

Guerilla Nightmare book, will scan it

Combat Warplanes / Re: Focke wulf Fw 58 Weihe
« on: January 20, 2023, 05:46:37 PM »
I just love this bird, so elegant !

Combat Warplanes / Re: Su-24
« on: January 20, 2023, 05:45:59 PM »
Good, thank you for sharing !

Aircraft Modeling / Re: Ju 87
« on: January 20, 2023, 05:45:06 PM »
Thank you friends !

And the ladders are painted...

Aircraft Modeling / Re: Farewell Mirage 5BD (1/72)
« on: January 20, 2023, 05:44:03 PM »
Wow, a lot of work, keep it going mate it looks good !

Aircraft Modeling / Re: Tornado IDS Eduard
« on: January 20, 2023, 05:43:12 PM »
I don't know why but it seems every Tornado kit has issues with the intake..... Good job so far mate !

Ground Forces / Re: TAM 4500 DV
« on: January 20, 2023, 05:25:49 PM »
Thank you !

The chassis is done, I only added a few pipes made of brass wire of my own  ( except the exhaust pipe, it's given in the set as brass wire only job was to cut it on size, measures are given in the instructions ) the only " big " scratch are the cardan shafts, they were not in the test speciment of the kit but will be provided in kit. About the kit I can say so far so good

Aircraft Modeling / Re: Ju 87
« on: January 12, 2023, 07:33:27 PM »
Thank you friends !

As you all know I like to put a bit of scenery around my models. On one photo of partisan Stuka there are two wooden ladders, by a photo and measuring to the Stuka to get dimensions I made them from evergreen styrene

Ground Forces / TAM 4500 DV
« on: January 12, 2023, 07:04:34 PM »
This truck was made in former Yugoslavia, it has it use in military and in civil purposes as well. It was made in TAM factory ( Tvornica Avtomobilov Maribor, now Slovenia ) and it was an Magirus-Deutz design produced by lycence. It has 4 cylinder air cooled diesel engine 85 Hp, it could carry 4.5 tons load on road and 2.5 tons off road, it has all wheel drive. There was many variants of this truck made ( variants such as 2x4 and with many different carrier variants, later on with V6 engine ) this model is build mostly for military with a winch mounted in front.

This is testing of TriglavModels resin 3D printed kit, 1/35 scale, by this I would like to thank TriglavModels for provided model.

First I started with chassis, after cleaning started the build. It need a lot of dry fittings, have to pay a lot of attention to be sure of parts gluing place, I suggest you go only one at the time, but the parts are surprisingly good fitting ( well designed ). Due to accuracy the parts are very thick and fragile, I learned on the hard way, managed to broke a few pieces but nothing too bad, all easy repair ( my fault, didn't pay attention on manufacturer warning about this... )

Here is the progress so far

Pages: [1] 2 3 ... 159