2221
Aircraft Modeling / Re: Albatros DIII Oeffag
« on: November 10, 2014, 09:07:46 PM »
Thank you my friends. Well the engine is all wired upfew more details and it's ready for painting
News:
Forum is closed for new members. All content is private and can not be shared
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2222
Miscellaneous Subjects / Re: Horse: Ragtime
« on: November 08, 2014, 11:29:33 AM »
great work !
2225
Aircraft Modeling / Re: Albatros DIII Oeffag
« on: November 03, 2014, 09:27:22 PM »
The work continued with the cam followers, but first I had to make a punch tool from injection needle for the ends of the springs on the cam followers.
The cam followers
And some more detailing, i made the sparks, the thicker wire is the spark while the thinner one is the cable. The connections are soldered just in case....
The cam followers
And some more detailing, i made the sparks, the thicker wire is the spark while the thinner one is the cable. The connections are soldered just in case....
2226
Aircraft Modeling / Re: Eduard Bf 109G 1/48
« on: November 02, 2014, 09:21:17 PM »
express work !
2227
Aircraft Modeling / Re: Eduard Bf 109G 1/48
« on: November 01, 2014, 09:41:58 AM »
nice work mate
2228
Aircraft Modeling / Re: Albatros DIII Oeffag
« on: October 28, 2014, 09:35:57 PM »
Austro-Daimler 225 hP
2230
Aircraft Modeling / Re: Albatros DIII Oeffag
« on: October 28, 2014, 07:50:06 PM »
there is never enough pictures......
2231
Aircraft Modeling / Re: A7 E Corsair II
« on: October 28, 2014, 07:49:41 PM »Take a one cup of 'rakija', relax a bit and get it again, I know you can do it.
I know what are you meaning, but this one stays like this, let's just call it artistic freedom
2233
Aircraft Modeling / Re: Albatros DIII Oeffag
« on: October 27, 2014, 11:57:42 PM »
Thank you mate. I started to work on the engine, as first step I put together the " rough " plastic parts leaving the detailing for later.
Eduard made a poor attempt to make the cam followers, this is what they made
And this is how it should look like.....
So had no choice, with one elegant hand move I throw the Eduard's part in the trash can I started scratching. First the springs ( the lighter is for size comparison )
Eduard made a poor attempt to make the cam followers, this is what they made
And this is how it should look like.....
So had no choice, with one elegant hand move I throw the Eduard's part in the trash can I started scratching. First the springs ( the lighter is for size comparison )
2234
Aircraft Modeling / Re: A7 E Corsair II
« on: October 27, 2014, 11:38:50 PM »
After endless hours of putty and sanding, trying to get the airspeed brake to the correct shape and fitting to the fuselage I got enough and put the model to " cool down " a bit....Well it was a long period of time but ten days ago I started again, and again it didn't work properly, so I took of the already glued airspeed brake from the fuselage and I will made it in a slightly open position, about 3 - 5 degrees. Yes, I'm aware of the fact that it almost never happened to look like this, but I just don't have the nerves for this anymore.....
2235
Ground Forces / Re: Schwirrflieger
« on: October 25, 2014, 02:43:28 PM »
no problem, glad I helped