Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - modellius

Pages: 1 ... 121 122 [123] 124 125 ... 161
1831
Ground Forces / Re: m8 greyhound 1/35
« on: May 08, 2016, 10:47:20 AM »
Thank you !

Painted and decals on spot

1832
Aircraft Modeling / Re: Yugoslav Spitfire
« on: May 07, 2016, 01:58:12 PM »
Thank you !

The painting started, after Mr.Surfacer I started to paint the marking ( once again no decal will be placed, all will be painted ) and I tried something new, the most difficult thing is to shade and made panel lines weathered properly, so this is what I figured out. First a layer of white, then a grey shade over panel lines, drew the lines with graphite pencil and then several layers of white until I got the look I desired for. Works perfectly   

1833
Ground Forces / Re: m8 greyhound 1/35
« on: May 07, 2016, 01:51:58 PM »
sorry chaps, I jumped a step ahead, wll not such a big problem..... This is how my m8 looked like before mr.surfacer with al of eduard's photo etch and some wire tuning up

1834
Aircraft Modeling / Re: T-38 Trumpeter 1/48
« on: May 06, 2016, 08:22:25 AM »
Nice progress mate, yes delux products are great, I had the chance to use a few of them and I was more than satisfied, keep up the good work, a nice bird this will be

1835
Aircraft Modeling / Re: Accurate Miniatures Yak 1
« on: May 05, 2016, 09:05:21 PM »
very nice indeed

1836
Miscellaneous Subjects / Re: Steampunk: Kampfläufer Suffolk I
« on: May 05, 2016, 01:16:23 PM »
Excellent !

1837
Combat Warplanes / Re: A new book
« on: May 05, 2016, 01:14:22 PM »
Looks very promissing judging by the preview  :-ok

1838
Ground Forces / Re: m8 greyhound 1/35
« on: May 04, 2016, 09:05:58 PM »
Once again I made a tow cable from brass wire, the main is assembled and the first mr surfacer on the spot, and the first and so far only problem has appeared, after assembling the jerry can holder and put the jerry can on it's place I found out the belt from eduard which should to fix the can on its place and prevent it from falling out is too short, so masking tape again to fix the problem

1839
Miscellaneous Subjects / Re: Steampunk: Kampfläufer Suffolk I
« on: May 04, 2016, 10:31:36 AM »
Excellent base, the wooden texture will give it a nice edge, well done mate

1840
Miscellaneous Subjects / Re: Wife shoes
« on: May 04, 2016, 10:29:26 AM »
Great ! Hope my wife won't see this......

1841
Warplane Art / Re: Mikoyan Gurevich MiG-21
« on: May 03, 2016, 11:09:36 PM »
excellent mate

1842
Aircraft Modeling / Re: A7 E Corsair II
« on: May 03, 2016, 08:52:03 PM »
And after hours and hours of painting, reparing the damages, painting again and all over again going in circles, lots of cofee, beer and nerves finally painted, only few decals were used ( USS Forestal, number below NAVY and stenciles ) and this is how it looks now

1843
Aircraft Modeling / Re: A7 E Corsair II
« on: May 03, 2016, 08:45:07 PM »
When I was searching for photos of electronic bays I found it out tat most modelers simply paint the most of it and called it a day, it's not that simple ( never is, right ? ) after hours of searching I found it out why, it's a bit complicated to find good pictures of these areas. Never the less finally I founded what I wanted so electronic bays are painted by photos I founded.

1844
Aircraft Modeling / Re: A7 E Corsair II
« on: May 03, 2016, 08:41:13 PM »
Te jet exhaust painted and installed

1845
Aircraft Modeling / Re: Yugoslav Spitfire
« on: May 03, 2016, 08:39:50 PM »
thank you, the glass parts glued and some heavy duty work still needed on this one

Pages: 1 ... 121 122 [123] 124 125 ... 161