1801
Aircraft Modeling / Re: Trumpeter F-106B
« on: May 17, 2016, 12:41:59 AM »
nice start, looking forward see it done !
News:
Forum is closed for new members. All content is private and can not be shared
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1804
Warplane Art / Re: Yak-9
« on: May 17, 2016, 12:40:02 AM »
Wow ! this is getting better and better every time !
1807
Ground Forces / Re: m8 greyhound 1/35
« on: May 14, 2016, 12:10:29 PM »
And now the weapons, first the 7,62 machine gun mounted beside the barrel of the main gun. Not much is visible of this gun when put on place inside the turret so I didn't give too much attention to it. Looking in my " left over " box I discovered Karaya's barrel for 7,62 gun, so I install it. It's a very simple tuning set, all you have to do is to remove the plastic barrel and install Karaya's ( which is a needle from injection ) and after that the perforated part which is all ready shaped so nothing else to do only to glue it to the spot. In the Eduard's photo etched parts for M8 there is a also a little update for this gun so I used it also. This is how it fell out
1808
Aircraft Modeling / Re: F-106 Delta Dart
« on: May 12, 2016, 07:26:56 PM »
this will be nice, keep up the good work !
1809
Ground Forces / Re: m8 greyhound 1/35
« on: May 12, 2016, 07:17:18 PM »
It makes no difference, the shiny paper makes harder then usual paper or toalet paper when dry so I like it better, but any of these is useful
1810
Ground Forces / Re: m8 greyhound 1/35
« on: May 12, 2016, 06:50:06 PM »
The figure, first I picked out the figure from my stash which was best for the idea I got. First I choose the head with helmet, but later on I changed my mind and placed a bare head without the helmet, the helmet will go on the vehicle. The original figure had a normal shirt sleeve but I wanted the sleeve to be wrapped up so i took the hands from dragon's africa corps figure set. As you can see it needed a lot of putty to get it wright. The blue UNEF stripe on the sleeve is from kitchen foil, the belts on the elmet Tamiya masking tape. And one detail I always liked so this time I made it, the Ray Ban sunglasses from brass wire
1812
Aircraft Modeling / Re: Yak-52 Ark 1/48
« on: May 12, 2016, 05:46:37 PM »
looks like a very fast build, well done
1813
Ground Forces / Re: m8 greyhound 1/35
« on: May 11, 2016, 10:40:41 PM »
The base. First the wooden base was made, then shaped and the " hole " filled with styrofoam which was covered with news paper, for gluing I used white glue for wood. After complete drying a layer of sand as been applied and a few " stones " randomly, the stones are larger pieces picked out from cat litter ( unused of course 
). Once again for the sand a white glue was used, while the stones are fixed with super glue ( gel ). The black stripes are marks for wheel tracks to avoid gluing stone on undesirable area
). Once again for the sand a white glue was used, while the stones are fixed with super glue ( gel ). The black stripes are marks for wheel tracks to avoid gluing stone on undesirable area