16471
Warplane Art / Re: Italian P47 remake
« on: March 18, 2010, 04:28:37 PM »
One small detail... drop down shadow on underwing pylon 
News:
Forum is closed for new members. All content is private and can not be shared
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
16472
Warplane Art / Re: Speed road to Photoshop
« on: March 18, 2010, 10:24:31 AM »
Now we should ask for a little tutorial 
16473
Aircraft Modeling / Re: Boeing Y1B-17 Project--1/48th Scale
« on: March 18, 2010, 08:33:48 AM »
You are right, works like this could be very hard... but it is very close to shape as I can see.
16474
Aircraft Modeling / Re: Boeing Y1B-17 Project--1/48th Scale
« on: March 17, 2010, 06:06:03 PM »
Amazing surgery work and best at is that fuselage perfectly fit into shape 
16475
Aircraft Modeling / Re: Late war Bf109
« on: March 17, 2010, 06:03:50 PM »
Thanks to our friend Jicehen who have send me numbers, am able now to continue work 
Thank you Jicehen 
Thank you Jicehen
16476
Aircraft Modeling / Re: Supermarine Spitfire Mk. XIV Academy 1/72
« on: March 17, 2010, 05:59:39 PM »
Here it is- model is progressed much and it goes more or less smooth. Only minor problem was fitting of the lower fuselage with the wing section but this is solved somehow... model filler
16477
Aircraft Modeling / Re: Rogozarski Ik-3 AZ model 1/72 scale
« on: March 17, 2010, 05:16:09 PM »
Hope that virus will be gone soon 
From my side here you are more images of the model in work. No specific point there, all steps show here are just regular work step, like in many other kits. Maybe on simple note that chanel which take air under the nose, should be a little bit deeper and if you more prefer you could close the rear side with the mesh.
From my side here you are more images of the model in work. No specific point there, all steps show here are just regular work step, like in many other kits. Maybe on simple note that chanel which take air under the nose, should be a little bit deeper and if you more prefer you could close the rear side with the mesh.
16478
Warplane Art / Re: 109E WIP
« on: March 17, 2010, 05:11:28 PM »
Matt- too many layers! Is there any special reason? My works are much simpler, with just a dozen of layers.
16479
Warplane Art / Me262 night fight
« on: March 17, 2010, 01:24:43 AM »
I have start work on the new combat art and this image present basic concept- night sky. Combat will present blast over the Mosquito and the two seat fighter Me262 in front.
16481
Aircraft Modeling / Re: HOW TO: Natural Metal Finishes
« on: March 16, 2010, 09:17:58 PM »
Very informative 
And this worth to highlight:
Three things to remember: Absolutely smooth surface; BRAND NEW X-acto blades; and fresh Bare Metal foil
And this worth to highlight:Three things to remember: Absolutely smooth surface; BRAND NEW X-acto blades; and fresh Bare Metal foil
16482
Warplane Art / Re: Speed road to Photoshop
« on: March 16, 2010, 08:43:11 PM »
I like the effect very much!!!
16483
Aircraft Modeling / Re: Rogozarski Ik-3 AZ model 1/72 scale
« on: March 15, 2010, 08:17:43 PM »
First at all I hope that you have visit download section of the site and that you have download zip file with pack of the archive images in hi resolution where you could note many of details, starting from construction details of the airplane elements like landing gear, middle flaps, engine close ups as well images of the operational machines. Maybe you have note that material inside zip is quite new...
I get some time to start this build some times ago when we have received pack of the models from AZ Models and I would like to grant special thanks to the company owner who have arrange this material for us. Impression about the kit is really hight- very simple products, all plastic parts on one fret (and one for transparent parts), machinery works on the molds are at very good level and surface details are crisp and good.
Images in attach:
01. no matter which kit you will open, note above post of our moderator, they are same in many aspects and main difference is the decal sheet. Instruction is very good and simply to follow.
02. vertical tail is a little off shape but this is very possible result of the shrinkage, which is common in the injection molding method.
03. fuselage match fine into the overall shape and only point to be note is that lower edge are too sharp on kit and it have to be rounded with sand paper.
04. wings also fit excellent to shape, with minor difference in the shape of the sleeve but as well this will be later cement with fuselage, new sleeve panel could be scribed
05. horizontal tail good shaped
06. small detail on the panel behind the pilot head, note panel which have to be engraved
07. basic coat of all of the interior is the aluminum color with various level of the polishing
08. IK-3 actually have no real floor and dominant bottom area elements are two long surfaces, I left them in metal color and paint around in back, this is fine solution as well I plan to make kit with the closed cockpit and this detail would not be seen through.
Work will be progress later...
I get some time to start this build some times ago when we have received pack of the models from AZ Models and I would like to grant special thanks to the company owner who have arrange this material for us. Impression about the kit is really hight- very simple products, all plastic parts on one fret (and one for transparent parts), machinery works on the molds are at very good level and surface details are crisp and good.
Images in attach:
01. no matter which kit you will open, note above post of our moderator, they are same in many aspects and main difference is the decal sheet. Instruction is very good and simply to follow.
02. vertical tail is a little off shape but this is very possible result of the shrinkage, which is common in the injection molding method.
03. fuselage match fine into the overall shape and only point to be note is that lower edge are too sharp on kit and it have to be rounded with sand paper.
04. wings also fit excellent to shape, with minor difference in the shape of the sleeve but as well this will be later cement with fuselage, new sleeve panel could be scribed
05. horizontal tail good shaped
06. small detail on the panel behind the pilot head, note panel which have to be engraved
07. basic coat of all of the interior is the aluminum color with various level of the polishing
08. IK-3 actually have no real floor and dominant bottom area elements are two long surfaces, I left them in metal color and paint around in back, this is fine solution as well I plan to make kit with the closed cockpit and this detail would not be seen through.
Work will be progress later...
16484
Warplane Art / Re: MiG-21f13
« on: March 15, 2010, 07:28:13 PM »
I have made some update of the numbers and here you are all in this reply I will leave for some time this version of MiG-21, hope I will back one day.
I will leave for some time this version of MiG-21, hope I will back one day.
16485
Warplane Art / Re: MiG-21f13
« on: March 15, 2010, 05:52:25 PM »
The first one is MG-31 from the HavLv/KarLsto, 1972. It have famous lynx badge on tail.