1216
Ground Forces / Re: Яков Джугашвили- Yakov Dzhugashvili
« on: January 12, 2018, 06:31:55 PM »
sad story.... great article, thank you !
News:
Forum is closed for new members. All content is private and can not be shared
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1217
Aircraft Modeling / Re: Vought Crusader, Eduard 1/48
« on: January 12, 2018, 05:35:26 PM »
this is going in excellent direction,looking forward to it !
1218
Aircraft Modeling / Re: Westland Wyvern 1/48
« on: January 12, 2018, 05:34:27 PM »
looks excellent !
1220
Aircraft Modeling / Re: Vought Crusader, Eduard 1/48
« on: January 11, 2018, 04:18:23 PM »
This is a Hasegawa kit, it's a good kit,looking forward to see the last gunfighter done
1221
Aircraft Modeling / Re: Tornado IDS
« on: January 11, 2018, 03:20:04 PM »
Thank you friends !
The fuselage is over complicated, the rear sections two halves are bottom and top, the front is left and right side, even the nose section is two parts.......Probably for manufacturer's easier mold of different variants..... A lot of putty will be needed as I can see......However, I started on engine and intakes, it's a disaster, pin marks, nothing similar to the real thing. The front blades of the engine are provided in the box, but after mounting it in the fuselage they are too low, so cutting, adding are done to put them in to right position. The intakes are junk, a lot of pin marks, missing areas and its all visible, they are big so all of these needed a correction, also there are some missing parts in the intake which are not provided by Hobby Boss and Eduard as well so more scratchbuild to come. And due to large intakes I will need to figure out some sort of intake tunnels between the intake parts and engine blades......Back to the cockpit, there is a missing part also, above the front instrument panel, even Eduard has not given them, and in the rear it was a gap which I filled with styreene sheets ..... Fun and games have been started indeed.... The last two pis are from britmodeler.com to show you the missing parts
The fuselage is over complicated, the rear sections two halves are bottom and top, the front is left and right side, even the nose section is two parts.......Probably for manufacturer's easier mold of different variants..... A lot of putty will be needed as I can see......However, I started on engine and intakes, it's a disaster, pin marks, nothing similar to the real thing. The front blades of the engine are provided in the box, but after mounting it in the fuselage they are too low, so cutting, adding are done to put them in to right position. The intakes are junk, a lot of pin marks, missing areas and its all visible, they are big so all of these needed a correction, also there are some missing parts in the intake which are not provided by Hobby Boss and Eduard as well so more scratchbuild to come. And due to large intakes I will need to figure out some sort of intake tunnels between the intake parts and engine blades......Back to the cockpit, there is a missing part also, above the front instrument panel, even Eduard has not given them, and in the rear it was a gap which I filled with styreene sheets ..... Fun and games have been started indeed.... The last two pis are from britmodeler.com to show you the missing parts
1223
Ground Forces / Re: Something New (and Old) VW Sedan
« on: January 10, 2018, 03:21:55 PM »
excellent !
1224
Aircraft Modeling / Re: Westland Wyvern 1/48
« on: January 09, 2018, 01:17:14 PM »
well, there are some issues over there, but I have no doubt that it will be corrected very soon ! keep up the good work mate !
1225
Aircraft Modeling / Re: Tornado IDS
« on: January 08, 2018, 08:36:13 PM »
Didn't hear the news.....
The cockpit wires are done, painting and detailing 90% done, a few fine touches and I call it done
The cockpit wires are done, painting and detailing 90% done, a few fine touches and I call it done
1226
Aircraft Modeling / Re: Westland Wyvern 1/48
« on: January 08, 2018, 05:15:32 PM »
very good mate !
1227
Ground Forces / Re: Something New (and Old) VW Sedan
« on: January 08, 2018, 12:23:47 PM »
both looks just fine, well done !
1228
Aircraft Modeling / Re: Tornado IDS
« on: January 07, 2018, 05:33:56 PM »
After a few very heavy problems I had with my AB compressor, which are fortunately solved, I could start to paint, first step was the cockpit main color, than the black, and after this I could install some Eduard's pre-painted part before I continue the wire work and detail painting.....
1229
Aircraft Modeling / Re: Tornado IDS
« on: January 07, 2018, 05:30:26 PM »
Thank you !
I was a bit lazy during the holidays, but still I made some progress. The nose wheel bay, furst I installed Eduard's PE parts and the started with the wires, still a few miles of wires to come......
I was a bit lazy during the holidays, but still I made some progress. The nose wheel bay, furst I installed Eduard's PE parts and the started with the wires, still a few miles of wires to come......
1230
Ground Forces / Re: Something New (and Old) VW Sedan
« on: January 07, 2018, 05:27:35 PM »
this is getting better and better every time, well done my friend !