Author Topic: Tornado IDS  (Read 4870 times)

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 20722
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Tornado IDS
« Reply #45 on: January 27, 2018, 08:29:48 PM »
Take care- with all of this elements, it could fly away from you ;)

Offline modellius

  • Full Member
  • ***
  • Posts: 1616
    • View Profile
Re: Tornado IDS
« Reply #46 on: January 27, 2018, 08:30:47 PM »
hope it won't  :-green :-green :-green

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 20722
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Tornado IDS
« Reply #47 on: January 27, 2018, 08:32:53 PM »
Put a domestic ham and bottle of domestic brandy near it, no way that he will go :))

Offline modellius

  • Full Member
  • ***
  • Posts: 1616
    • View Profile
Re: Tornado IDS
« Reply #48 on: January 27, 2018, 08:34:15 PM »
excellent idea! :))

Offline draken35

  • Hero Member
  • *****
  • Posts: 7334
    • View Profile
Re: Tornado IDS
« Reply #49 on: January 28, 2018, 09:31:52 AM »
Excellent !

Offline Second Air Force

  • Moderator
  • Hero Member
  • *****
  • Posts: 5378
    • View Profile
Re: Tornado IDS
« Reply #50 on: January 28, 2018, 02:59:54 PM »
Excellent work on the intake trunks! Most folks would just glue the fuselage together and forget about it, but you've done it right!!

Offline modellius

  • Full Member
  • ***
  • Posts: 1616
    • View Profile
Re: Tornado IDS
« Reply #51 on: January 30, 2018, 08:32:47 PM »
Some fuselage build, very poor fittings, lot of extra work, the worst is the intake, on the upper side I had to remove the part of the original plastic and replace it with some PE frame left-over, by this I got more realistic look, and started with the exhaust, poor fitting here as well. In these sanding and replacing ( a ton of putty as well ) most of the fine surface details are gone, remaking them will be an adventure...... In case this isn't enough I managed to make some damage as well, mostly on the landing gear, fortunately no permanent damage, all is reparable, but extra time is needed.....

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 20722
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Tornado IDS
« Reply #52 on: January 30, 2018, 08:44:17 PM »
A lot of work...

Offline draken35

  • Hero Member
  • *****
  • Posts: 7334
    • View Profile
Re: Tornado IDS
« Reply #53 on: February 05, 2018, 03:36:17 PM »
Courageous man...

Offline modellius

  • Full Member
  • ***
  • Posts: 1616
    • View Profile
Re: Tornado IDS
« Reply #54 on: March 17, 2018, 12:29:05 PM »
This kit is really got on my nerves, one step forward, two steps back.....For several weeks now.... It's going back to the box, one day maybe......I just really can't get the will to continue

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 20722
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Tornado IDS
« Reply #55 on: March 17, 2018, 02:08:43 PM »
Can you try to do one kit out of box? Just to relax? it work greatly :))

Offline modellius

  • Full Member
  • ***
  • Posts: 1616
    • View Profile
Re: Tornado IDS
« Reply #56 on: March 17, 2018, 02:22:02 PM »
well, maybe I should   :-green