Author Topic: Spad VII (Roden 1/32)  (Read 62300 times)

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Spad VII (Roden 1/32)
« Reply #30 on: November 07, 2010, 08:14:46 AM »
Thank you very much!

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Spad VII (Roden 1/32)
« Reply #31 on: November 14, 2010, 10:50:47 AM »
Back to another problem:

The PE part is very hard to form correctly; and I've constated that it's larger than the kit part. So, bad fitting obviously...

So, we will use the kit part!!!

...that will of course ask for many work but the fit will be correct. All is said.
Work in progress

Break after two hours, to remain zen...


Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23150
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Spad VII (Roden 1/32)
« Reply #32 on: November 14, 2010, 11:53:38 AM »
Uh... :( look like nightmare and it look like it need so much time to solve properly. Is it possible to cut separate gills from etched parts and to fit it to original part?

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Spad VII (Roden 1/32)
« Reply #33 on: November 14, 2010, 12:20:08 PM »
Possible, Srecko. I'm envisaging that option. Or maybe to use aluminium paper. Or maybe to use nothing, as that part is on the undersuface of the fuselage...

It's not a nightmare, but I will not recommend that kit for beginner...

Letipapa

  • Guest
Re: Spad VII (Roden 1/32)
« Reply #34 on: November 14, 2010, 02:56:40 PM »
Outstanding! I enjoy looking all this! :-love :-obey :-salut

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Spad VII (Roden 1/32)
« Reply #35 on: November 14, 2010, 04:01:47 PM »
I will try to post a "step-by-step" action when I will continue the opening of the louves

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Spad VII (Roden 1/32)
« Reply #36 on: November 14, 2010, 07:15:36 PM »
Step-by-step:

Two holes are made, on the extremities of each louve.


The plastic is removed with a cutter




And here is the final result - A little bit of sanding is needed yet:

... There are 108 louves on that element...

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23150
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Spad VII (Roden 1/32)
« Reply #37 on: November 14, 2010, 07:25:02 PM »
Huge work :-clap

Offline Sall

  • Sr. Member
  • ****
  • Posts: 4641
  • Build what YOU want,the way YOU want to,and above all-have fun!
    • View Profile
Re: Spad VII (Roden 1/32)
« Reply #38 on: November 14, 2010, 07:34:39 PM »
No comment! :-eek :-eek :-eek :-eek :-eek :-eek
 :-clap :-clap :-clap :-clap :-clap :-clap :-clap :-clap :-clap :-clap :-clap :-clap

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Spad VII (Roden 1/32)
« Reply #39 on: November 15, 2010, 09:06:37 PM »
Thank you!!!

OK, now we can start the painting job! First of all, as ever I use white primer (Tamiya XF-2 & airbrush)


No big problem but the propeller revealed under the primer a little lack of putty... Correction in progress...

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23150
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Spad VII (Roden 1/32)
« Reply #40 on: November 15, 2010, 10:54:06 PM »
Basic interior paint is nice :-ok

samuraj77

  • Guest
Re: Spad VII (Roden 1/32)
« Reply #41 on: November 16, 2010, 09:20:31 AM »
Very nice work  :-clap :-clap :-clap

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Spad VII (Roden 1/32)
« Reply #42 on: November 16, 2010, 06:06:50 PM »
Thank you! Next step soon I hope...

Letipapa

  • Guest
Re: Spad VII (Roden 1/32)
« Reply #43 on: November 19, 2010, 06:11:57 PM »
I admire your clearness in work. All in order, very, very cool.  :-obey :-obey :-obey :-love  :-wave

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Spad VII (Roden 1/32)
« Reply #44 on: November 19, 2010, 06:41:42 PM »
Thank you!

No photos today, but I've sanded the propeller, and prepared the parts for painting - but also prepared the order of use of paints: first dope, then aluminium, and lastly wood...