Author Topic: Spad VII (Roden 1/32)  (Read 62938 times)

Profa

  • Guest
Re: Spad VII (Roden 1/32)
« Reply #15 on: October 24, 2010, 06:07:58 PM »
Seems like a professional dedication to details (and unfortunate Roden's flaws in production)... So far so good! :-ok
Waiting for the progress...

Offline Sall

  • Sr. Member
  • ****
  • Posts: 4641
  • Build what YOU want,the way YOU want to,and above all-have fun!
    • View Profile
Re: Spad VII (Roden 1/32)
« Reply #16 on: October 24, 2010, 07:07:24 PM »
Nice job! :-flo
« Last Edit: October 24, 2010, 07:13:56 PM by Sall »

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23157
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Spad VII (Roden 1/32)
« Reply #17 on: October 24, 2010, 07:20:58 PM »
Just few question...

- is it more easy to press louvres on soft wood instead over the edge of glass?

- I hear for Gator glue, is it thick density? It is interesting as well it is acrylic

- turnbuckles... what method you are using to make it?

:-wave

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Spad VII (Roden 1/32)
« Reply #18 on: October 26, 2010, 06:13:25 PM »
Thanks again for your kind comments!

Srecko,

- I think it could be good too to press louves on soft wood - Perheaps even better than my method... I didn't have thinked to soft wood...

- Gator glue haves the density of PVC glue. Very interresting to place little parts that you need a little bit time to adjust or position perfectly. Te reverse of the medal is that you cannot use that glue for fast work because she needs a looong time to dry - But when dry, it's hard!!! Another advantage is that when placing a part, if you have glue in excess, you simply remove the excess with a paintbrush with water...

- For the turnbuckles, I will use the method of "Agiosdimitrios" that you can see on Theaerodrome:
http://www.theaerodrome.com/forum/models/47760-roland-cii-1-48-eduard-8.html#post519560

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23157
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Spad VII (Roden 1/32)
« Reply #19 on: October 26, 2010, 06:34:09 PM »
Good about the Gator, it look also to be perfect for other parts, like transparent. Interesting method for turnbuckles, I use method described in one special issue of Japanese magazine Model Art.

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Spad VII (Roden 1/32)
« Reply #20 on: October 26, 2010, 06:38:16 PM »
Can you tell me more about your turnbuckles method?

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23157
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Spad VII (Roden 1/32)
« Reply #21 on: October 26, 2010, 07:09:37 PM »
Thin wire, make a loop around another thin wire but made from steel, hard steel. Turning until get loop just around hard wire.

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Spad VII (Roden 1/32)
« Reply #22 on: October 26, 2010, 07:17:41 PM »
Very interresting! I will have to give a try to both method before to decide wheter to use for the Spad...

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Spad VII (Roden 1/32)
« Reply #23 on: November 03, 2010, 03:12:19 PM »
After a few day "out of business" due to professional reasons, I'm back on the Spad...

The exhausts: here is what I can to as best with the PE. I'm not really happy of that...

More than that, the attachment system to the fuselage is complex (two PE parts), too fine and too long. I think I will use the kit parts, that I will try to ameliorate.

I've also tried to form the trap under the engine. Unsucessfully...

I will try again, but later, after the demi-fuselage will be glued together. But I'm thinking to "B" plan: the use of the kit part that, of course, I will have to ameliorate too...

Some little progress:

The ailerons


The wheels

...Putty and sanding needed of course...

The actual bench:



Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23157
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Spad VII (Roden 1/32)
« Reply #24 on: November 03, 2010, 03:35:48 PM »
Looks fine to me and I think that this will look good when complete. It is true that PE parts give power to model but can not be always perfect.

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Spad VII (Roden 1/32)
« Reply #25 on: November 03, 2010, 03:44:04 PM »
We have all or own limits with PE parts... And, as always with PART photoecth, some parts are simply too hard to use successfully...

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Spad VII (Roden 1/32)
« Reply #26 on: November 06, 2010, 08:27:53 PM »
Again, a little bit of work with PE before painting...

Not less than 8 parts for that result - But from far better than the kit part (only one element)


OK, ready for the airbrush now!

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23157
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Spad VII (Roden 1/32)
« Reply #27 on: November 06, 2010, 08:37:52 PM »
This subject is one of those when we can just seat and watch with pleasure :-clap This assembly preparation is wonderful!

Profa

  • Guest
Re: Spad VII (Roden 1/32)
« Reply #28 on: November 06, 2010, 09:13:05 PM »
As No.1 said, just watching with pleasure :-jump

Offline Sall

  • Sr. Member
  • ****
  • Posts: 4641
  • Build what YOU want,the way YOU want to,and above all-have fun!
    • View Profile
Re: Spad VII (Roden 1/32)
« Reply #29 on: November 07, 2010, 01:08:29 AM »
 :-clap :-clap :-clap :-clap :-clap