Author Topic: Renard 31 (FRROM 1/72)  (Read 93039 times)

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Renard 31 (FRROM 1/72)
« Reply #60 on: January 04, 2019, 09:39:02 PM »
Yes, it is also present on the photos of the book about the Renard 31...

I finally managed to "build" the machinegun and the wing...

Offline modellius

  • Sr. Member
  • ****
  • Posts: 2520
    • View Profile
Re: Renard 31 (FRROM 1/72)
« Reply #61 on: January 16, 2019, 05:33:34 PM »
stunning mate !

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Renard 31 (FRROM 1/72)
« Reply #62 on: January 17, 2019, 03:55:43 PM »
Thank you.  On hold actually, just the time to finish the Dornier

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Renard 31 (FRROM 1/72)
« Reply #63 on: February 13, 2019, 06:21:12 PM »
Back to the Renard 31!
I think it's better to begin the painting phase with the upper surfaces, because I will use some Vallejo metal paints for the lower surfaces and it's better to  mask the khaki once painted.
So, masking phase... Not finished; next time the wing...

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23092
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Renard 31 (FRROM 1/72)
« Reply #64 on: February 13, 2019, 07:09:05 PM »
Few hours of mask work for few minutes of airbrushing... plastic modelers life ;)

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Renard 31 (FRROM 1/72)
« Reply #65 on: February 13, 2019, 07:21:28 PM »
Exactly 😂

Offline modellius

  • Sr. Member
  • ****
  • Posts: 2520
    • View Profile
Re: Renard 31 (FRROM 1/72)
« Reply #66 on: February 14, 2019, 04:28:33 PM »
yep, sad truth.... hours of masking/unmasking for 2.5 minutes of spraying.....

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Renard 31 (FRROM 1/72)
« Reply #67 on: February 24, 2019, 11:56:54 AM »
The primer revealed some defaults on the back of the fuselage and on the front of the wing; so I had to use Tamiya White Putty... Sanding done; now new primer to be applied...

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23092
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Renard 31 (FRROM 1/72)
« Reply #68 on: February 24, 2019, 12:57:11 PM »
Now look so smooth, after update this will be perfect :))

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Renard 31 (FRROM 1/72)
« Reply #69 on: February 24, 2019, 07:29:08 PM »
Hope so my friend.
Have forgotten to say that i've removed the photoetch parts of the undersurface of the wing... This will facilitate the forthcoming manipulations. Photoetch will be replaced just before painting the undersurfaces

Offline modellius

  • Sr. Member
  • ****
  • Posts: 2520
    • View Profile
Re: Renard 31 (FRROM 1/72)
« Reply #70 on: March 03, 2019, 06:24:49 PM »
nice corrections, will be great to see it painted

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Renard 31 (FRROM 1/72)
« Reply #71 on: March 04, 2019, 08:00:26 AM »
Thank you. I have put masks on the undersurfaces of the wing again; ready for a new primer...

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Renard 31 (FRROM 1/72)
« Reply #72 on: March 18, 2019, 07:37:42 PM »
White primer again... All is OK now

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23092
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Renard 31 (FRROM 1/72)
« Reply #73 on: March 18, 2019, 07:49:22 PM »
Paints lets go :))

Offline draken35

  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: Renard 31 (FRROM 1/72)
« Reply #74 on: March 18, 2019, 10:02:26 PM »
Yessss!