LetLetLet ~ Warplanes
Let Let Let - Warplanes => Aircraft Modeling => Topic started by: modellius on June 09, 2022, 02:11:51 AM
-
Hi fellas !
I started a new project, JU-87 B2 The Partisan Stuka. After a mistake of crew landed Ju-87 B2 Wr.Nr.0406 5B+ER on airfield Rajlovac and been captured by Yugoslav Partisans. Soon it flew again with new markings and continued to serve partisans and after the war the YPA Air Force. The research about the painting is still on, so far I found out a varios ( at least three ) paintings of the same Stuka but more to follow about this as the project go on...
About the kit : I got Italeri Ju-87 B2 in 1/48 scale. It is a very good kit, as I searched the internet the only aftermarket for this kit is exhaust, propeller and the MG. I was surprised, after I looked the inside of the box I found out why. It is very detailed kit even with PE parts, reminding me to early Eduard kits. Surface details are very good. As you all know I am a " rivet counter " modeler, so I will post the pictures in few days.
P.S. In the meantime if anybody have some pictures or drawings of this bird it is more than welcome. See ya soon !
-
I have seen remains of this machine in Museum, it have soviet (??) dark grey over it. But as I can remember, it have basic splinter camouflage with... front part over painted. There is some photos, will take a look, there is enough time till your work progress.
-
As you all know I'm a registered rivet counter :-green :-green :-green :-green well not 100% but I just like the look of rivets on the surface on the model. First step of the build are rivets on the wing
Fun fact about the kit : highly detailed, so far seems not too hard to build but in soft plastic, all the time I had this Airfix feeling......
-
I have such feeling that even workers in aviation factory did not get such attention about rivets :-smey
-
Thank you !
Unfortunately I don't have much time for modeling these days, but some progress is still on. some more rivets, the plan is to move on cockpit now
-
Rivets are full job for it self...
-
:-ok
-
This time I didn't bother much with wires in cockpit, only few one, enough I think, instrument panel, well first I was sceptic, decals and PE, it seems odd when you see it in box, but the result is good.... The wheel legs are closed but Italeri suggest to glue it and then paint, it seems complicated so I made some adjustments to be able to fit the wheels after painting is done. More to come soon
-
:-ok
-
Enough detailed :)
-
The fittings on the fuselage and the wings and the joining of the wings with fuselage are very good, but the nose section is a disaster...... Italeri give an engine and as I can see they made the nose section to be built open with visible engine, however if you want to close it like me disaster comes in full scale as you can see. Lots of details lost so it wont be a walk in the park
-
Never work plastic kits when you are under stress, they are for pleasure :)
-
Ouch... Keep calm and go step by step ;-)
-
Some progress on my Stuka. The putty and sanding is almost done, few more fine touches and then Mr.Surfacer to see what have I done, the basic panel lines are re-scribed, but lot of details are lost so a lot a work on nose section is still to come
-
A lot of work but it will end as great build as usual :))
-
Just stunning work
-
Thank you friends !
As you all know I like to put a bit of scenery around my models. On one photo of partisan Stuka there are two wooden ladders, by a photo and measuring to the Stuka to get dimensions I made them from evergreen styrene
-
:-tri :-tri :-tri
-
:-ok
-
Thank you friends !
And the ladders are painted...
-
You have a photo of this ladders?
-
Nicely done !
-
You have a photo of this ladders?
Guerilla Nightmare book, will scan it
-
All right, thanks
-
Picture from the book, Boris Ciglić provided the picture for the book, the ladders are visible it is a poor picture I don't have a scanner....
-
Thanks, I think I know photo but must check out first. Did you decide about final camouflage pattern?
-
Yes, red star on white base, Yugoslav flag on tail and overpainted 5B ER, the latest partisan Stuka paint scheme, after this it had painted in total with the new insignia....
-
I have seen its remains in Museum depots, top coat was Soviet fighter grey paint.
-
I have seen its remains in Museum depots, top coat was Soviet fighter grey paint.
That was my guess, thank you mate to make me sure !
-
Just check my files and I find a bulk of files in total chaos, but to regret, not all photos I guess I have. To me big surprise I even find technical drawings I did in some past, no idea when and who order it... so, few images of Yugoslav Stuka I have...