Author Topic: Griffon 1/72  (Read 14842 times)

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23092
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Griffon 1/72
« on: March 18, 2006, 07:01:41 PM »
There is one interesting kit of the Nord Griffon test plane. Model is made by Airmodel from Germany and main parts are vacuu form and the small part are epoxy resin casted. Cockpit canopy is clear vacuu form. Instruction is made on two sheet paper, one with basic instruction and the other one with technical drawings and paint scheme. No decal included. Kit is correct in shape while some of the panels have to be rescribed.

safo_test

  • Guest
Re: Griffon 1/72
« Reply #1 on: March 19, 2006, 12:59:00 AM »
well !
the lack of decals is not a gift !  :msn_sarcastic:

5 colors band of the world record,
baptism name and emblem ...

this will be a challenge !

Good luck !

safo_test

  • Guest
Re: Griffon 1/72
« Reply #2 on: March 21, 2006, 01:11:17 PM »
I eventually found again this resin kit issued in 1987.
Made by Mr Jourdan (who has launch his own collection the following year) on orderby the french magazine "Le Fanatique de l'Aviation" under the name of "Fana Modèle n°1", this kit cost 245 FF at the time (i.e. 60 $ in 1987 or +/- 70 $ today).

A Two part study was published in # 218 & 219 of the magazine, including a B&W close-up of the Griffon II in the french museum (look at REAL WARPLANES section for a color one!).

At that time, resin kit were basic or expensive for those with good level of details.

700 of the 1.200 boxes done by the company have been sold in a month.
This model kit and the support of the magazine has greatly help people to discover the resin world and a second model (the Delanne 10 C2) has follow some months later.

Here are some glimpses on the box.

http://img122.imageshack.us/img122/9035/fm1griffon11bl.jpg
Griffon 1/72


http://img58.imageshack.us/img58/840/fm1griffon20zq.jpg
Griffon 1/72

despite kit was said "without bubbles" two nice ones are visible on a wheel  :msn_ooooh:

http://img239.imageshack.us/img239/8515/fm1griffon36le.jpg
Griffon 1/72


part in lower right of the above picture are the both canard plans (to be separate).

http://img128.imageshack.us/img128/7990/fm1griffon43ly.jpg
Griffon 1/72


http://img128.imageshack.us/img128/8343/fm1griffon50xs.jpg
Griffon 1/72

the both fuselage halves with several chips which hide the tail part

http://img239.imageshack.us/img239/4976/fm1griffon66bo.jpg
Griffon 1/72


you can see that the parts are heavily shining due to chemicals use for unmoulding.
With time, this has "cement" with chips.

Notice says that the engraved parts are enough deep to allow full washing and sanding before coating.
As a european citizen, unit use is the centimeter.
« Last Edit: March 21, 2006, 07:38:20 PM by safo_test »

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23092
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Griffon 1/72
« Reply #3 on: March 21, 2006, 01:25:50 PM »
Voila :) Thank for this valuable info safo!!!

Offline Nico Braas

  • Jr. Member
  • **
  • Posts: 959
    • View Profile
Re: Griffon 1/72
« Reply #4 on: March 26, 2006, 02:00:45 PM »
Yes!!!!!!
Last Saturday I have finally purchased that nice 1/48 scale La Fonderie kit of the Nord Griffon II.
It is a limited run injection moulding kit and that means that some flash will be present and that you must not expect Tamiya or Hasegawa quality! Surface is not very smooth, buth since panels are engraved this is no problem. Of course the whole model will have to be sanded and polished before the paint job! Locating pins for fuselage halves and wings are not present and some care will have to be taken when joining fuselage halves and aligning wings in the correct position. Instructions are very short and not always clear but this will not present any problems for the more experienced model builder!

Attached a photographic 'impression' of the kit!

Offline Nico Braas

  • Jr. Member
  • **
  • Posts: 959
    • View Profile
Re: Griffon 1/72
« Reply #5 on: March 26, 2006, 02:02:56 PM »
More of the La Fonderie kit!

Offline Nico Braas

  • Jr. Member
  • **
  • Posts: 959
    • View Profile
Re: Griffon 1/72
« Reply #6 on: March 26, 2006, 02:05:06 PM »
And another one!

Offline Nico Braas

  • Jr. Member
  • **
  • Posts: 959
    • View Profile
Re: Griffon 1/72
« Reply #7 on: March 26, 2006, 02:06:30 PM »
And the last......

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23092
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: Griffon 1/72
« Reply #8 on: March 26, 2006, 02:09:19 PM »
Nice looking model!!! And good details + detail set!

safo_test

  • Guest
Re: Griffon 1/72
« Reply #9 on: April 22, 2006, 03:55:20 PM »
A recent model show in Paris gives me the chance to meet F.M. (Fonderie Miniature) and to have a look inside the both kit.

Surprise !
they are different !

Here is the 1/48th model once finished

http://img102.imageshack.us/img102/9721/dscf07352cn.jpg
Griffon 1/72


http://img175.imageshack.us/img175/51/dscf0736r1jh.jpg
Griffon 1/72


please note that the decal are misplaced (look my photoscope of the preserved aircraft on the REAL WARPLANE section [NORD Griffon]).

And now the interesting sight : the 1/72 with its full jet engine versus the 1/48 with only a front and rear panel to symbolise it.

http://img108.imageshack.us/img108/5696/dscf0737r8of.jpg
Griffon 1/72



Neverless, a nice plane which need some work (F.M. are short run kits).
« Last Edit: April 22, 2006, 04:11:56 PM by safo_test »