LetLetLet ~ Warplanes

Let Let Let - Warplanes => Aircraft Modeling => Topic started by: Sall on November 30, 2011, 10:28:25 PM

Title: December Group Build - MiG-29
Post by: Sall on November 30, 2011, 10:28:25 PM
The Mikoyan MiG-29 (Russian: Микоян и Гуревич МиГ-29; NATO reporting name: "Fulcrum") is a fourth-generation jet fighter aircraft designed in the Soviet Union for an air superiority role. Developed in the 1970s by the Mikoyan design bureau, it entered service with the Soviet Air Force in 1983, and remains in use by the Russian Air Force as well as in many other nations. The NATO name "Fulcrum" was sometimes unofficially used by Soviet pilots in service.
The MiG-29, along with the Sukhoi Su-27, was developed to counter new American fighters such as the McDonnell Douglas F-15 Eagle, and the General Dynamics F-16 Fighting Falcon.

(http://img217.imageshack.us/img217/9029/11169675781481mig29saf1ra7.jpg)

The MiG-29 has two widely spaced Klimov RD-33 turbofan engines, each rated at 50.0 kN (11,240 lbf) dry and 81.3 kN (18,277 lbf) in afterburner. The space between the engines generates lift, thereby reducing effective wing loading, to improve maneuverability. The engines are fed through wedge-type intakes fitted under the leading-edge extensions (LERXs), which have variable ramps to allow high-Mach speeds. As an adaptation to rough-field operations, the main air inlet can be closed completely and alter using the auxiliary air inlet on the upper fuselage for takeoff, landing and low-altitude flying, preventing ingestion of ground debris. Thereby the engines receive air through louvers on the LERXs which open automatically when intakes are closed. However the latest variant of the family, the MiG-35, eliminated these dorsal louvers, and adopted the mesh screens design in the main intakes, similar to those fitted to the Su-27.

(http://www.leteckemotory.cz/motory/rd-33/rd-33_06.jpg)

Cockpit

The cockpit features a conventional centre stick and left hand throttle controls. The pilot sits in a Zvezda K-36DM zero-zero ejection seat which has had impressive performance in emergency escapes.

The cockpit has conventional dials, with a head-up display (HUD) and a Shchel-3UM helmet mounted display, but no HOTAS ("hands-on-throttle-and-stick") capability. Emphasis seems to have been placed on making the cockpit similar to the earlier MiG-23 and other Soviet aircraft for ease of conversion, rather than on ergonomics. Nonetheless, the MiG-29 does have substantially better visibility than most previous Russian jet fighters, thanks to a high-mounted bubble canopy. Upgraded models introduce "glass cockpits" with modern liquid-crystal (LCD) multi-function displays (MFDs) and true HOTAS.

(http://upload.wikimedia.org/wikipedia/commons/thumb/4/40/MiG-29_cockpit_3.jpg/430px-MiG-29_cockpit_3.jpg)

Armament

Armament for the MiG-29 includes a single GSh-30-1 30 mm cannon in the port wing root. This originally had a 150-round magazine, which was reduced to 100 rounds in later variants. Original production MiG-29B aircraft cannot fire the cannon when carrying a centerline fuel tank as it blocks the shell ejection port. This issue was corrected in the MiG-29S and later versions. Three pylons are provided under each wing (four in some variants), for a total of six (or eight). The inboard pylons can carry either a 1,150-litre (300 US gal) fuel tank, one Vympel R-27 (AA-10 "Alamo") medium-range air-to-air missile, or unguided bombs or rockets. Some Soviet aircraft could carry a single nuclear bomb on the port inboard station. The outer pylons usually carry R-73 (AA-11 "Archer") dogfight missiles, although some users still retain the older R-60 (AA-8 "Aphid"). A single 1,500-litre (400 US gal) tank can be fitted to the centerline, between the engines, for ferry flights, but this position is not used for combat stores. The original MiG-29B can carry general-purpose bombs and unguided rocket pods, but not precision-guided munitions. Upgraded models have provision for laser-guided and electro-optical bombs, as well as air-to-surface missiles.

(http://www.patricksaviation.com/files/photos/full/23622_17849.jpg)

Yugoslavia

Yugoslavia was the first European country outside the Soviet Union to operate the MiG-29. Yugoslavia received 14 MiG-29Bs and two MiG-29UBs from the USSR in 1987. MiG-29s were put into service with the 127th Fighter Aviation Squadron, based at Batajnica Air Base, north of Belgrade, Serbia.

Yugoslav MiG-29s saw little combat during the breakup of Yugoslavia, and were used primarily for ground attacks. Several Antonov An-2 aircraft used by Croatia were destroyed on the ground at Čepin airfield near Osijek, Croatia in 1991 by a MiG-29, however there were no MiG-29 losses. At least two MiG-29 carried out an air strike on Banski dvori, the official residence of the Croatian Government, on 7 October 1991.

The MiG-29s continued their service in the subsequent Federal Republic of Yugoslavia. Because of the United Nations arms embargo against the country, the condition of the MiG-29s worsened. Before Operation Allied Force began in 1999, Yugoslav MiG-29s were over 10 years old, short of spare parts and proper maintenance. By March 1999, the Yugoslav Air Force had 11 MiG-29s considered operational.

A total of six MiG-29s were shot down during the Kosovo War, of which three were shot down by USAF F-15s, one by a USAF F-16, and one by a Dutch F-16.  One aircraft, according to pilot, was hit by friendly fire from the ground. Another four were destroyed on the ground. Some Russian sources claim that a MiG-29 shot down an F-16 on 26 March 1999, but this kill is disputed, as the F-16C in question was said to have crashed in the US that same day.

Most historians attribute the downing of a F-117 as being shot down by SAM commander Zoltan Dani. Some sources claimed it was shot down by a MiG-29 piloted by Lt. Col. Gvozden Đukić, which was the nom de guerre of Zoltan Dani.

The Air Force of Serbia and Montenegro continued flying its remaining five MiG-29s at a very low rate after the war. In spring 2004, news appeared that MiG-29 operations had ceased, because the aircraft could not be maintained. In 2007, all five MiG-29 were sent to Russia to be refurbished, and upgraded. In 2008, the MiG-29s began returning to service with the Serbian Air Force. In the 2009 one Serbian MiG-29 crashed, the pilot and one soldier on the ground died.

(http://maketar.com/phpBB2/userpix/36_mig2941_1.jpg)
(http://cdn-www.airliners.net/aviation-photos/photos/4/3/7/0365734.jpg)
(http://cdn-www.airliners.net/aviation-photos/photos/3/0/9/1610903.jpg)
Title: Re: December Group Build - MiG-29
Post by: ta152c on November 30, 2011, 10:36:54 PM
Very concise, good article :)
Title: Re: December Group Build - MiG-29
Post by: No.1 on November 30, 2011, 10:37:13 PM
Nice intro kid  :-clap :-clap :-clap :-tri :-flo :-ok Let's go!!!
Title: Re: December Group Build - MiG-29
Post by: Sall on November 30, 2011, 10:38:19 PM
My favourite plane! :-love The best fighter plane in the WHOLE WORLD!! :-love :-love :-tri
Group Build MiG-29-finally!! :-tri :-tri
I will work on Italeri MiG-29A 1/72 kit. I don't know yet which camouflage i will paint, but it certainly will be SFRJ/SRJ or SRB markings! Will see.. :-flo
One more thing... I will not start work until 11th-12th December :( , becouse until then i have to find/buy some resin/PE parts for it... (I think i know where i can find something what i need, but i have to wait for 11th-12th december) :-flo
PS. I will try to work on F-15E until then, but then, F-15E become secondary kit. ;)
Happy work guys!!! :-clap :-clap :-clap
Title: Re: December Group Build - MiG-29
Post by: Profa on December 01, 2011, 06:10:14 AM
I'll pass this one, too long queue of previous builds...
Sall, you could find resin details (cockpit, proper nose and afterburners) at approaching New Years' modelling competition in Belgrade Aircraft museum. As i remember, it was rather cheap last year when I bought'em...
Title: Re: December Group Build - MiG-29
Post by: Sall on December 01, 2011, 08:16:35 AM
I will search there Profa. :-ok
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on December 01, 2011, 12:19:14 PM
Great introduction, and a great airplane!
Title: Re: December Group Build - MiG-29
Post by: draken35 on December 01, 2011, 09:25:35 PM
Excellent introduction, mate!

For me, it's the Eduard 1/48th scale MiG-29UB... Will begin it as soon as the Helcat is finished
Title: Re: December Group Build - MiG-29
Post by: Sall on December 01, 2011, 09:38:17 PM
Excellent mate... ;)
Which markings will you use? :-think
Title: Re: December Group Build - MiG-29
Post by: draken35 on December 01, 2011, 10:03:46 PM
Excellent mate... ;)
Which markings will you use? :-think

I'm not decided yet: Russia or Azerbaijan... That will only depend of which paints that are still lacking actually, I will find first ;)
Title: Re: December Group Build - MiG-29
Post by: draken35 on December 01, 2011, 10:10:22 PM
Ooops! I've forgotten the brassin set for wheels...
Title: Re: December Group Build - MiG-29
Post by: Sall on December 01, 2011, 10:20:37 PM
 :-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on December 15, 2011, 07:10:16 PM
I'm start work on my MiG-29. :-jump :-love
Resin parts will wait my next build of MiG-29 in some close time,so... :-flo This will be OOB with some scratchbuild and resin seat K-36DM,which will arrive to me in few days. ;)
Here you are instrument panel. ;) :-flo
1st image show instrument panel after light gray.
2nd image show some paint job on same.
3rd image is finished instrument panel. ;)
I'm not at home for weekend so i will continue work next week. :-flo :-tri
Ps. Hope you will soon start work on yours MiG-29. :-flo
Title: Re: December Group Build - MiG-29
Post by: draken35 on December 15, 2011, 07:38:55 PM
 :-ok
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on December 16, 2011, 12:25:29 AM
Keep the updates coming!
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 20, 2011, 04:33:40 PM
Here is my start today. My initial intention was to complete redesign basic kit as well it is much incorrect. I am afraid that I was not capable to manage good scale print of the drawings (I did my best in PC but output device have some issues... ) therefore I will build this direct from box and in this way will be used for review.

Set of work images are here...
Title: Re: December Group Build - MiG-29
Post by: Sall on December 20, 2011, 05:35:52 PM
Nice and fast job Srecko. :-clap :-clap As you said. ;)
Title: Re: December Group Build - MiG-29
Post by: Sall on December 20, 2011, 05:47:42 PM
Here you are my progress.  :-wave
I must to add some detailes on instrument panel, and to paint some areas again.
Now instrument panel is finished. I will not touch her any more. :))
Also i work on cockpit. I have resin seat K-36, but MiG-29 9-12 use K-36DM seat. I have to add 2 detailes on this seat,and then it will look like K-36DM. :-flo
Next,i had to cut some piece of plastic in cockpit tub(it looked like  box), and put inside piece of stiren(next i have to fill and sand it) so i can put resin seat. ;)
Title: Re: December Group Build - MiG-29
Post by: Sall on December 20, 2011, 07:14:01 PM
I have added 2 detailes on K-36,now K-36DM. :)) :-flo
Cockpit tub floor is sanded... ;) Tomorrow i will continue work on cockpit,and hope i will assemble both halves of fuselage. ;)
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 20, 2011, 07:52:25 PM
Good work mate, very good :-clap
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on December 20, 2011, 11:31:59 PM
Great job, both of you!
Title: Re: December Group Build - MiG-29
Post by: Ernie on December 20, 2011, 11:41:55 PM
Nice work Srecko and Sall, great progress! :-ok
Ernie
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 21, 2011, 05:44:48 AM
Thank you :-ok
Title: Re: December Group Build - MiG-29
Post by: draken35 on December 21, 2011, 06:38:11 AM
 :-ok :-ok
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 21, 2011, 09:49:18 AM
Last night progress is this ;) Assembly coming later.
Title: Re: December Group Build - MiG-29
Post by: Sall on December 21, 2011, 10:37:01 AM
Thank you guys very much!!! :-clap I will continue my work later today. ;)
Good job Srecko. ;) A lot of filling&sanding job. :-roll
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 21, 2011, 03:46:35 PM
More work today ;)
Title: Re: December Group Build - MiG-29
Post by: Sall on December 21, 2011, 04:09:36 PM
 :-ok
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 22, 2011, 05:11:58 PM
Fights with join lines  :-kr
Title: Re: December Group Build - MiG-29
Post by: Sall on December 22, 2011, 05:44:41 PM
 :-kr :-bat I will have same problems on the join line of air intake and engine on other side...
Title: Re: December Group Build - MiG-29
Post by: Sall on December 22, 2011, 05:51:31 PM
I find time for modeling! :-jump
Here you are the right  console with buttons, and left console with handle of throttle. I must to wait for everything to be dry, to start with the painting. I hope that it will be tomorrow. Now i will paint the cockpit tub, i put a new picture later.
I must say one more thing! Albion Alloys Tubes are great,great thing!!! :-love
Title: Re: December Group Build - MiG-29
Post by: draken35 on December 22, 2011, 06:13:04 PM
Well, I think I will have same problem...
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 22, 2011, 06:18:17 PM
Next time I will order axe and hammer for scale modeling :))
Title: Re: December Group Build - MiG-29
Post by: Sall on December 22, 2011, 08:26:37 PM
Here i am... :-jump
I have painted cockpit tub and seat. :-ok
Continue tomorrow. :-flo
Title: Re: December Group Build - MiG-29
Post by: draken35 on December 22, 2011, 08:32:20 PM
Well done mate! :)
Title: Re: December Group Build - MiG-29
Post by: Sall on December 22, 2011, 08:32:43 PM
Thank you mate!! :-flo
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 22, 2011, 08:50:25 PM
Good work mate, this will be ready for painting soon?
Title: Re: December Group Build - MiG-29
Post by: Sall on December 22, 2011, 08:55:49 PM
Thanks Srecko. Probably in 7.. I hope. ;)
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 22, 2011, 08:58:31 PM
:-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on December 22, 2011, 09:04:39 PM
7 days. ;)
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 22, 2011, 09:13:21 PM
(http://img263.imageshack.us/img263/7162/7dayscocoacakebar35gful.jpg) :)) :))
Title: Re: December Group Build - MiG-29
Post by: Ernie on December 22, 2011, 09:28:16 PM
Excellent work on the cockpit Sall! looks great :-ok :-flo
Ernie
Title: Re: December Group Build - MiG-29
Post by: Sall on December 22, 2011, 09:33:14 PM
Thank you Ernie! :-flo
Hahahahaha. Nice joke Srecko! :)) :-joke
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on December 23, 2011, 12:38:34 AM
Great cockpit, Sall!

All those joint lines and filler.......I know the feeling!
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 23, 2011, 11:05:53 AM
My progress this morning- hope that images talk for it self.
Title: Re: December Group Build - MiG-29
Post by: Sall on December 23, 2011, 11:13:26 AM
Very nice mate! :-clap :-clap
Title: Re: December Group Build - MiG-29
Post by: Ernie on December 23, 2011, 02:20:14 PM
Very good and quick work No.1, who will be done first, you or Sall :-think :)) I still haven't found my kit yet :-dal
Ernie
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 23, 2011, 02:20:23 PM
More progress today ;)
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 23, 2011, 02:21:25 PM
Very good and quick work No.1, who will be done first, you or Sall :-think :)) I still haven't found my kit yet :-dal
Ernie

No worry about your kit, maybe time to complete any build you have on desk. Maybe submarine you start some time ago?
Title: Re: December Group Build - MiG-29
Post by: Ernie on December 23, 2011, 02:23:09 PM
Yes, that is on this list this week!
Ernie
Title: Re: December Group Build - MiG-29
Post by: Sall on December 23, 2011, 02:58:58 PM
 :-ok
My progress later today. ;)
Title: Re: December Group Build - MiG-29
Post by: draken35 on December 23, 2011, 05:19:26 PM
 :-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on December 24, 2011, 12:33:43 AM
Here i am... :-jump
Work on cockpit... All assembled,but not finished! ;) I still have to work on it,to add some detailes,and to put windshield,and fill&sand it... :-roll
Continue tomorrow! :-wave
Title: Re: December Group Build - MiG-29
Post by: draken35 on December 24, 2011, 07:38:05 AM
Nice work mate!
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 24, 2011, 07:46:59 AM
And fast as I can see :-clap
Title: Re: December Group Build - MiG-29
Post by: Ernie on December 24, 2011, 11:05:33 AM
And fast as I can see :-clap

And the race is on!!!!
Ernie
Title: Re: December Group Build - MiG-29
Post by: Sall on December 24, 2011, 01:44:52 PM
Thank you friends. :-flo :-flo
This is first kit on which i work with "normal speed" after long time. ;) Soooo,i'm very happy! :-jump :-tri
Title: Re: December Group Build - MiG-29
Post by: Sall on December 24, 2011, 04:15:17 PM
I think that cockpit is finally finished! :-tri:-jump
I have added gun sight, also few wires and little stiren in area under the windshield. Everything filled&sanded,painted, and ready to put windshield when i come to that stage. ;)
Next stage-> riveting! :-flo
Title: Re: December Group Build - MiG-29
Post by: draken35 on December 24, 2011, 04:21:29 PM
 :-ok
Title: Re: December Group Build - MiG-29
Post by: Jicehem on December 24, 2011, 05:34:23 PM
Hello,

It's an amazing work. I like it.

Jicehem  :-wave
Title: Re: December Group Build - MiG-29
Post by: Sall on December 24, 2011, 05:36:28 PM
Thank you friends!! :-flo :-flo
Glad to see you here again Jicehem!!! ;)
Title: Re: December Group Build - MiG-29
Post by: Jicehem on December 24, 2011, 05:46:27 PM
Glad to see you here again Jicehem!!! ;)

Thank you very much Sall.  :-salut :-salut

Title: Re: December Group Build - MiG-29
Post by: No.1 on December 25, 2011, 08:06:15 AM
I have visitors last days so my work were slow down. Kit I work in moment get last night coat of primer grey color and this is show on last image. Rest of the images show preparations and fittings on kit. In this stage kit is very complicated to handle as well it have many small etched parts and in other hand kit require much of movement (just to state a bulk of decals to put on it)
Title: Re: December Group Build - MiG-29
Post by: Sall on December 25, 2011, 12:02:42 PM
Good. :-ok
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 25, 2011, 02:37:37 PM
Two camouflage colors painted. I use Humbrol as base grey and Revel for green grey tone. Both are acrylic and work perfect.
Title: Re: December Group Build - MiG-29
Post by: Ernie on December 25, 2011, 02:50:48 PM
Very Nice! Camo looks great :-ok
Ernie
Title: Re: December Group Build - MiG-29
Post by: Sall on December 25, 2011, 03:57:19 PM
 :-ok
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 25, 2011, 04:45:19 PM
Thank you friends :) It is a bit wash out and maybe some panels should be more exposed ;)
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on December 25, 2011, 04:58:32 PM
Very nice!
Title: Re: December Group Build - MiG-29
Post by: draken35 on December 25, 2011, 05:32:34 PM
 :-ok
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 26, 2011, 11:18:56 AM
Unbelievable what mistakes I left on surface and paint it over!!!
Title: Re: December Group Build - MiG-29
Post by: draken35 on December 26, 2011, 11:22:05 AM
To be inattentive is often my speciality, mate...
Title: Re: December Group Build - MiG-29
Post by: 0viking0 on December 26, 2011, 12:10:00 PM
Very nice progress
Title: Re: December Group Build - MiG-29
Post by: Sall on December 26, 2011, 12:58:46 PM
You will fix that mate,not worry! ;) :-flo
I will work on mine later today. ;)
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 26, 2011, 02:02:51 PM
This is fixed and painted again ;)
Title: Re: December Group Build - MiG-29
Post by: Ernie on December 26, 2011, 02:18:46 PM
I'm happy to see I am not the only one who does that :)) :-wave Glad you got it all fixed up No.1, thats all that matters!
Ernie
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on December 26, 2011, 04:23:49 PM
That was only a "primer coat"! (At least that's my story and I'm sticking to it...... ;))
Title: Re: December Group Build - MiG-29
Post by: Sall on December 26, 2011, 08:41:08 PM
 :-ok
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 27, 2011, 01:31:28 PM
Dear friends, this is the period when I feel it could be better to spent in hibernation then to do anything. This kit is generator of problems, you see process of protection to paint dielectric panels. No matter that I have protect paint with top coat and use most soft protection paint, after removing mask paint on some areas were chopped... now I have to repair this. But on in moment, now I lay in my chair and write this with laptop on my knee and going to stay like that for some time.

 :-wave
Title: Re: December Group Build - MiG-29
Post by: draken35 on December 27, 2011, 02:09:09 PM
Let that kit on the shelves for a few days; things will go better after...

Not rational, but better to change your mind a little bit in such cases...
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 27, 2011, 02:24:12 PM
I agree and will do just like that :))
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on December 27, 2011, 03:29:18 PM
Let that kit on the shelves for a few days; things will go better after...

Not rational, but better to change your mind a little bit in such cases...

That is one of modeling's Great Truths! All will be better.........at a later time.
Title: Re: December Group Build - MiG-29
Post by: Sall on December 27, 2011, 04:16:41 PM
That can be some problem with paint... :-think
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 27, 2011, 04:35:39 PM
I have recover all, images coming tomorrow ;)
Title: Re: December Group Build - MiG-29
Post by: Sall on December 27, 2011, 04:37:11 PM
Good. ;)
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 28, 2011, 01:52:40 PM
Ready for decals :))
Title: Re: December Group Build - MiG-29
Post by: draken35 on December 28, 2011, 02:54:47 PM
Wow! Fast and nice!!!
Title: Re: December Group Build - MiG-29
Post by: Sall on December 28, 2011, 06:05:39 PM
Yes,nice! :-ok
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 28, 2011, 06:25:08 PM
Thank you friends :)
Title: Re: December Group Build - MiG-29
Post by: ta152c on December 28, 2011, 09:39:27 PM
Lovely :)
Title: Re: December Group Build - MiG-29
Post by: Sall on December 29, 2011, 12:58:35 AM
Here i'm again... :-jump After few days of break,i'm continue to work on my favourite plane: MiG-29. :-flo
This is first time i have use riveter. :-tri :-jump
1st pics show right inside.
2nd pics show right outside.
3rd pics show left outside.
4th pics show is left inside.
Left inside is first side i riveted. It wasn't the best,so i sand that side, and riveted it again. ;)
5th pics show left inside fixed and finished. ;)
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 29, 2011, 06:39:43 AM
Little master :))
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 29, 2011, 11:14:08 AM
New exhaust  :-tri
Title: Re: December Group Build - MiG-29
Post by: Sall on December 29, 2011, 11:46:18 AM
Definitely it looks much better! :-clap
Title: Re: December Group Build - MiG-29
Post by: No.1 on December 29, 2011, 11:51:51 AM
Review is here:

http://www.letletlet-warplanes.com/2011/12/29/mig-29-exhaust-nozzle/
Title: Re: December Group Build - MiG-29
Post by: Sall on December 30, 2011, 02:31:13 AM
Extra!
Title: Re: December Group Build - MiG-29
Post by: No.1 on January 01, 2012, 08:05:26 PM
Loosing my eye's with stencils :(
Title: Re: December Group Build - MiG-29
Post by: draken35 on January 01, 2012, 09:14:32 PM
Take all your time for that phase; it's bothering if you try to go quickly...
Title: Re: December Group Build - MiG-29
Post by: No.1 on January 01, 2012, 09:54:18 PM
I can be fast even if I want. I manage to make stencils under nose bottom. Only the all of the rest remain to be made...
Title: Re: December Group Build - MiG-29
Post by: Ernie on January 01, 2012, 10:20:17 PM
Fun, like sanding :) :-roll
Ernie
Title: Re: December Group Build - MiG-29
Post by: No.1 on January 02, 2012, 02:31:04 PM
Bottom is completed  :-wall
Title: Re: December Group Build - MiG-29
Post by: Sall on January 02, 2012, 04:37:49 PM
Good!! :-clap
Title: Re: December Group Build - MiG-29
Post by: draken35 on January 02, 2012, 07:14:55 PM
Big fun!!!
Title: Re: December Group Build - MiG-29
Post by: No.1 on January 02, 2012, 08:12:34 PM
Decals work completed, only pylons remained. This all sound like two day before completed!!!
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on January 03, 2012, 06:07:31 AM
Are there as many stencils on this MiG-29 as there are on the '21? If so, the pylons are loaded with them!

Good work on all projects, we await further advances!
Title: Re: December Group Build - MiG-29
Post by: No.1 on January 03, 2012, 07:15:31 AM
Good things is that there is not that much stencils as on MiG-21, I have complete all decals work on kit. Best thing is that decals for pylons are made in single block, not as set of separate labels as on '21
Title: Re: December Group Build - MiG-29
Post by: No.1 on January 03, 2012, 08:48:56 AM
Ten minutes ago it get coat of flat varnish. Now I have removed cockpit canopy and can focus on many small details. Few decals did not flat down and this will be correct later ;)
Title: Re: December Group Build - MiG-29
Post by: Sall on January 03, 2012, 04:29:47 PM
Good! :-clap This will be finished soon... :-jump
Title: Re: December Group Build - MiG-29
Post by: No.1 on January 03, 2012, 04:31:51 PM
Yes, soon, hope tomorrow ;)
Title: Re: December Group Build - MiG-29
Post by: No.1 on January 04, 2012, 11:15:34 AM
This is progress steps, I guess today afternoon I will have review on web site. Hope...  :-dal
Title: Re: December Group Build - MiG-29
Post by: No.1 on January 04, 2012, 02:41:40 PM
Completed somehow but I miss better images for you here. Give me some time, in this moment I just wish to rest a little. Bad days for me...
Title: Re: December Group Build - MiG-29
Post by: Sall on January 04, 2012, 04:44:19 PM
Cockpit is very good!! :-clap
Hardly wait pics, but do not hurry. Take your time. ;) :-flo
Title: Re: December Group Build - MiG-29
Post by: No.1 on January 04, 2012, 07:21:21 PM
Thank you mate :-ok
Title: Re: December Group Build - MiG-29
Post by: draken35 on January 04, 2012, 07:34:34 PM
Very well done!!!
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on January 04, 2012, 07:53:01 PM
Beautiful!
Title: Re: December Group Build - MiG-29
Post by: Sall on January 15, 2012, 03:21:31 AM
Hey Srecko... Will you put pics of finished model? :-roll :-think
Title: Re: December Group Build - MiG-29
Post by: Sall on January 15, 2012, 03:30:59 AM
I'm continue to work on riverts, again on vertical part of tail. :-flo
Every rivet i have to sting with needle (one is sewing needle and second is part of circle drawing tool with needle ;) )
Hope tomorrow more work! :-flo
Title: Re: December Group Build - MiG-29
Post by: No.1 on January 15, 2012, 07:36:54 AM
Riveting with needle? Old good way :)
Title: Re: December Group Build - MiG-29
Post by: draken35 on January 15, 2012, 07:54:14 AM
Excellent work...
Title: Re: December Group Build - MiG-29
Post by: No.1 on January 15, 2012, 08:07:55 AM
And... sand surface with 800 grit sanding paper to flat down edge around punch points ;)
Title: Re: December Group Build - MiG-29
Post by: Sall on January 15, 2012, 04:23:36 PM
Riveting with needle? Old good way :)
No,no! I use Trumpeter riveter, but every riveter makes too shallow rivets, so i need to use needle to make them more deep. ;)
And... sand surface with 800 grit sanding paper to flat down edge around punch points ;)
All right! ;) I will do that. Thanks for advice! :-flo
Title: Re: December Group Build - MiG-29
Post by: Sall on February 06, 2012, 03:41:15 AM
I'm again in the game. :-wave
I sanded vertical part of tail with 800 grit sanding paper,as Srecko says. ;)
I start to do rivets on wings. Also i had to re-scribe some panel lines... :-roll I finished right wing(upper side),and also sand it. And start work on left wing(upper side),but i'm to tired,so i left it for tomorrow.
Lower side i will riveted after i glue wing with fuselage... Maybe tomorrow-it depends of my obligations. ;) :-flo
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on February 06, 2012, 04:04:40 AM
Good to see you back at this!
Title: Re: December Group Build - MiG-29
Post by: No.1 on February 06, 2012, 06:56:56 AM
Hope you will complete it soon :-ok
Title: Re: December Group Build - MiG-29
Post by: draken35 on February 06, 2012, 05:13:53 PM
:-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on February 07, 2012, 03:15:18 AM
More progress...  :-jump
Left wing is done(upper side),also horisontal part of tail(upper side). I had to fill and sand some panel lines,and to scribe new one on other place. ;) Also all rivets on upper side is done. ;)
Going forward on fuselage! :-flo
Title: Re: December Group Build - MiG-29
Post by: No.1 on February 07, 2012, 06:37:42 AM
Very good! Fill the rivet on the round access door :))
Title: Re: December Group Build - MiG-29
Post by: Sall on February 07, 2012, 10:53:50 AM
 ;) It will be done later today.
Title: Re: December Group Build - MiG-29
Post by: draken35 on February 07, 2012, 05:29:28 PM
Hard and long work but splendid result!
Title: Re: December Group Build - MiG-29
Post by: Ernie on February 09, 2012, 02:39:52 AM
Looks excellent!, your hard work is making good results :-ok
Ernie
Title: Re: December Group Build - MiG-29
Post by: Sall on February 09, 2012, 05:07:52 AM
Thanks friends! :-flo
Title: Re: December Group Build - MiG-29
Post by: zetman on February 10, 2012, 11:12:26 PM
Hi there after a long period of absence.
Nice efforts in one of my favourite cold war planes.I have two of them and hope to start them once upon a time,wearing Begemonds BuAf or new Serbian roundels.Especially the new Serbian colour scheme,as Slovakian digital camo also are both very eye catching.
I had the chance to watch a pair of Bulgarian Mig-29,one single A and a two-seater trainner from GRAF IGNATIEVO Air Base live in the air, and on the ground when participated in the common exercise BRAVE HEART SOUTH 2008 co-operating with our F-16C/D from 330/341/347 Squadrons of the Hellenic Air Force in 111
(http://www.airforce.gr/images/aircraft/341_Bulgarian_Exercise.jpg)
A pretty big,lovely ugly,old but still reliable (though the initial A type needs much upgrates to keep up with the NATO standarts) will be in my next projects for sure.
Title: Re: December Group Build - MiG-29
Post by: Sall on February 11, 2012, 02:17:09 AM
Thank you Zetman! :-flo
This is my favourite plane ever,so i can't wait to see them!! Also hope that those kits will be in fully "Zetman standards"-with much scratchbuild! ;)
When we can expect them? :-think
Title: Re: December Group Build - MiG-29
Post by: No.1 on February 11, 2012, 06:40:47 AM
Bulgarian have interesting camouflage so this will be great build for sure :))
Title: Re: December Group Build - MiG-29
Post by: Sall on February 20, 2012, 12:41:08 AM
My computer was busy,my sister use it,so i can't work on rivets,but i decided to make some progress tonight,and i work on rockets. ;)
Sanding them, glue some parts,and put them on toothpick, also prepared to work on them tomorrow.  :-jump
I don't have power to fight with tiny rivets now,so in next few days i will work on other things on this kit... ;)
One more thing-i'm not sure that i will use this 4xR-60 missiles from box,maybe i will use 4xR-73(i have 2,i need 2 more :-think ) missiles,but i didn't decided yet. Anyway i will try to paint them,also wheels,and those tiny things,but plane i will painted at Srecko's place with airbrush!! :-tri
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on February 20, 2012, 03:13:46 AM
 :-clap :-clap :-clap :-ok
Title: Re: December Group Build - MiG-29
Post by: No.1 on February 20, 2012, 07:01:34 AM
Oranges and apples? What scale? By the way, nice work on parts, clean and crisp work :-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on February 20, 2012, 12:09:14 PM
Thanks friends! :-flo
:)) :)) Srecko, 1:1 - to have health and power to fight with tiny parts! :)) :))
Title: Re: December Group Build - MiG-29
Post by: No.1 on February 20, 2012, 12:33:45 PM
Power source :-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on February 20, 2012, 01:50:20 PM
I did a little search. And make decision. I will do some of planes from JRV & PVO, 112, 113 or 114. Probably 114,and with this load!
(http://www.acig.org/artman/uploads/jrvipvo_mig-29_114.jpg)
Title: Re: December Group Build - MiG-29
Post by: draken35 on February 20, 2012, 05:54:12 PM
:-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on February 21, 2012, 01:12:34 AM
I primed missiles today with Hu 127 enamel. I decided to put on my kit 2xR-27R,2xR-73E,and 2xR-60MK. All 9-12B version of MiG-29(my kit is 9-12B) can't launch this 3 type of missiles in the same time(flight),or 2xR-27R and 4xR-73E or 2xR-27R and 4xR-60MK,but every MiG-29 can fly with them... I have found some photos of Yugoslavian JRV i PVO MiG-29 in fly with this combination(all 3 types od missiles),so i will put it on my kit! (pic is in my previous post ;) ) Hope i will next week go to home of my parents,and get 2xR-73E,because they are in theirs house.
I also paint wheels... :-flo
Tomorrow i will apply Hu 34(White),and it is acril paint... I will see on what more i will work tomorrow! :)) Also,everything is prepared for tomorrow work! ;) :-flo
Ps. Apples in my case have one more function... :)) :)) :-flo
Title: Re: December Group Build - MiG-29
Post by: draken35 on February 21, 2012, 05:05:35 PM
:-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on February 22, 2012, 03:34:30 AM
Thank you Daniel! :-flo
As i promised i continue work on missiles. First and second image is after first "hand" of Hu 34. Other three images are finished missiles after 4 "hands" of Hu 34.
I also glue wings,and use putty to fill gap between wings and fuselage. ;) Fix panel lines and rivets. Now everything is ok! :-jump
Maybe tomorrow i will continue work on rivets,but certainly i will work on something...  :-flo
Title: Re: December Group Build - MiG-29
Post by: No.1 on February 22, 2012, 06:27:54 AM
Very good work on surface :)
Title: Re: December Group Build - MiG-29
Post by: draken35 on February 22, 2012, 07:04:15 PM
Excellent, mate!
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on February 22, 2012, 07:42:44 PM
This is looking great, Sall!
Title: Re: December Group Build - MiG-29
Post by: Sall on February 23, 2012, 02:19:26 AM
Thank you friends a lot!! :-flo :-flo
Today i work on air intake. Glue 2 part for every intake,sand them and then filling and sanding job twice!  :-razz
First seven images is work on air intake. Last 4 images are dry fit of air intake with fuselage.. There will be problems to fill all those gaps..  :-wall :-wall
Title: Re: December Group Build - MiG-29
Post by: No.1 on February 23, 2012, 03:00:04 AM
I guess you need a coat of filler over intake to completely smooth the surface?
Title: Re: December Group Build - MiG-29
Post by: Sall on February 23, 2012, 03:45:13 AM
It is smooth, believe me, but i still can see there line. Definitely i need to change filler. This Humbrol putty is not good. :-wall Any recomendation? :-think
One more thing, does anyone have advice how to solve problem with fit of intake and fuselage? Pretty big gaps. :-think
Title: Re: December Group Build - MiG-29
Post by: No.1 on February 23, 2012, 07:44:56 AM
I use two of them, first liquid and another is standard...
Title: Re: December Group Build - MiG-29
Post by: Sall on February 23, 2012, 10:21:03 AM
What standard??
Title: Re: December Group Build - MiG-29
Post by: No.1 on February 23, 2012, 10:23:27 AM
Best possible ;)

(http://static.hlj.com/images/tam/tam87053.jpg)
Title: Re: December Group Build - MiG-29
Post by: Sall on February 23, 2012, 10:57:51 AM
 :-ok
Title: Re: December Group Build - MiG-29
Post by: draken35 on February 23, 2012, 05:31:20 PM
For putty: better Italeri or Tamiya, or Squadron.
You can also try to use your Humbrol putty diluted with a little bit of aceton...
 You can also make your own (excellent) filler: put some sprue parts into an old liquid cement. That give a kind of paste that you can apply with a toothpick and then sand easily.

for big gaps I would use miliput.
Title: Re: December Group Build - MiG-29
Post by: Sall on February 23, 2012, 05:34:48 PM
I will try to find Italeri putty. I work with it before this Humbrol,and it was excellent! I was very satisfied with it.
If i don't find,i will see what to do. Thanks for help. I will use something from this. ;) :-flo :-flo
Quote
You can also try to use your Humbrol putty diluted with a little bit of aceton...
I tried. Believe me, it become worse then without acetone. :-wall Italeri putty works excellent with acetone. :-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on March 06, 2012, 01:04:31 AM
Little progress... I glue air intake with fuselage,and there are big holes,and deep lines.. :-bat
I need to buy some good putty this days,so i can start work on solving this problems. :-blah Also i have to made some tool for sanding putty inside of wheel bay. It is very difficult to access there. I will use also this:
(http://www.letletlet-warplanes.com/forum/index.php?action=dlattach;topic=2271.0;attach=46627;image) (http://www.letletlet-warplanes.com/forum/off-road/letletlet-meetings/?action=dlattach;attach=46626;image)
When i finished that,i will put some wires inside of wheel bays. True is that very little of that can be seen,but it will be for my soul.  :-flo
Here you are images of glued air intake and fuselage,also images of holes and lines... :-/
Title: Re: December Group Build - MiG-29
Post by: No.1 on March 06, 2012, 05:59:38 AM
Go ahead mate, this will be nice when you complete it :-ok
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on March 06, 2012, 07:30:30 AM
That seam is really, really in a difficult spot, Sall!

Another option on filler would be to find an automotive body shop or auto parts store and get some "spot filler". It is basically a paste form of red oxide primer and works very well.

Can't wait to see your next update! :-ok
Title: Re: December Group Build - MiG-29
Post by: draken35 on March 06, 2012, 04:18:16 PM
Nice work anyway...
Title: Re: December Group Build - MiG-29
Post by: Sall on March 06, 2012, 05:24:55 PM
Thanks friends!! :-flo :-ok
I will try to solve this problem this days... ;)
Title: Re: December Group Build - MiG-29
Post by: Sall on March 21, 2012, 02:13:52 PM
I work little on MiG-29.
Until i'm waiting putty,i decided to fill little this holes and lines with glue in gel. ;) I use:
(http://www.letletlet-warplanes.com/forum/index.php?action=dlattach;topic=1868.0;attach=40978;image) (http://www.letletlet-warplanes.com/forum/off-road/my-new-acquisition%28s%29/?action=dlattach;attach=40977;image)
And here you are photos. I fill little this holes,because i think that it is better to put something inside before putty.
You will not see anything special,because when this glue dry,he is transparent/clear. ;)
Title: Re: December Group Build - MiG-29
Post by: No.1 on March 21, 2012, 02:53:23 PM
It is good also to make provisional filler with mix of this cement with powder like graphite powder, chalk powder or what you have available.
Title: Re: December Group Build - MiG-29
Post by: Sall on March 21, 2012, 03:19:25 PM
Thanks for advice... I will try to think something,and use some of advice that you mentioned me on Facebook.. :-flo
Title: Re: December Group Build - MiG-29
Post by: No.1 on March 21, 2012, 03:35:26 PM
You are welcome :)) Use this board as main area for conversation please ;)
Title: Re: December Group Build - MiG-29
Post by: Sall on March 21, 2012, 05:44:15 PM
 :-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on April 12, 2012, 03:36:28 PM
Finally some update! :-jump :))
Todat fill and sand job! :-wall 3M putty is great! :-flo :-clap
Continue later. ;)
Title: Re: December Group Build - MiG-29
Post by: No.1 on April 12, 2012, 05:06:46 PM
Now only to practice and you will very soon have perfect results :-clap
Title: Re: December Group Build - MiG-29
Post by: draken35 on April 12, 2012, 05:16:10 PM
:-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on April 12, 2012, 06:37:25 PM
One more update...  ;)
And one more layer of putty. :-bat
Also filling job in wheel bays. While i'm waiting to be all dry, i need to think some tool for sanding.
See you in next post. :-flo
Title: Re: December Group Build - MiG-29
Post by: Sall on April 12, 2012, 07:50:45 PM
While i'm waiting ,i decided to work on other thing. I try to upgrade gun. It is not like on real plane,but believe me look much better then it was in the box. ;)
I paint gun panel in Hu114,just that you can see better what i do. ;) Everything is crazy tiny,and i take photo is macro mod(you see things which you can't with eye!!),so when you look at it live ,it is very good. ;)
Title: Re: December Group Build - MiG-29
Post by: No.1 on April 12, 2012, 07:56:27 PM
You have no template for guide?
Title: Re: December Group Build - MiG-29
Post by: Sall on April 12, 2012, 08:00:03 PM
No,as you see.. :(
Title: Re: December Group Build - MiG-29
Post by: No.1 on April 12, 2012, 08:04:11 PM
Must get some...
Title: Re: December Group Build - MiG-29
Post by: Sall on April 12, 2012, 08:05:10 PM
I know... :( It is on my shortlist! Don't know where to find them... :-think
Title: Re: December Group Build - MiG-29
Post by: No.1 on April 12, 2012, 08:12:54 PM
Will see, I know that there is many manufacturers
Title: Re: December Group Build - MiG-29
Post by: Sall on April 12, 2012, 08:13:31 PM
 :-ok
Title: Re: December Group Build - MiG-29
Post by: No.1 on April 12, 2012, 08:22:40 PM
http://www.relishmodels.co.uk/hasegawa-template-set-1.html

(http://www.relishmodels.co.uk/images/detailed_images/HATP1.jpg)
Title: Re: December Group Build - MiG-29
Post by: Sall on April 12, 2012, 08:24:26 PM
How much? :-think
I saw-13 pounds,it is around 16e...
Title: Re: December Group Build - MiG-29
Post by: No.1 on April 12, 2012, 08:27:30 PM
See on link above ;) There is also Voyager Model scribing templates, they look good
Title: Re: December Group Build - MiG-29
Post by: Sall on April 12, 2012, 08:36:06 PM
I definitely need something like this... ;) I will try to save some money and buy some of this sets. ;)
Title: Re: December Group Build - MiG-29
Post by: No.1 on April 12, 2012, 08:36:51 PM
Me too ;)
Title: Re: December Group Build - MiG-29
Post by: Sall on April 12, 2012, 08:39:30 PM
We can buy it together. It is easier. ;) - for me! :-smey :-smey :))
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on April 12, 2012, 10:43:20 PM
Hey, that filler looks familiar. Glad it is working for you, Sall! :-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on April 12, 2012, 11:08:19 PM
Haha. :))
Thank you once again. ;) It works perfect! ;)
Title: Re: December Group Build - MiG-29
Post by: Sall on April 20, 2012, 05:09:35 PM
As i said in "My new acquisition(s)" topic, new exhaust for my MiG-29. This will be first time that i will use resin parts,except seat, and i'm very happy because of that. :-tri It will help my MiG-29 looks much more realistic, since exhaust from the box are not the best. ;)
Second thing,for which i am not too happy,is that i see bubbles(about 20 on visible parts-some are smaller some are little bigger),and there is one little damage :-bat :-wall,but i will fix it :-flo.
Anyway i'm happy,because my MiG-29 will looks nicer! :-tri
Also,i will put them with Srecko,because as i said,this is first time i use resin parts,and i'm not 100% sure where i need to cut excess of resin. I hope that Srecko will help me. :-flo :-flo
Here you are photos. ;)
Title: Re: December Group Build - MiG-29
Post by: No.1 on April 20, 2012, 05:13:38 PM
Best at all is that you will have more experience with that type of material ;)
Title: Re: December Group Build - MiG-29
Post by: draken35 on April 20, 2012, 06:39:41 PM
Each new material will improve your knowledge and yur skills... ;)
Title: Re: December Group Build - MiG-29
Post by: Sall on April 20, 2012, 06:57:23 PM
I agree! :-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on April 22, 2012, 10:21:51 PM
Today,not much time. :( I just have about half an hour to sand this-one more layer of filler. ;)
And now i'm very satisfied-everything is smooth! :-flo :-tri
Today or in Tuesday i will try to make some tool to sand filler in wheel bays(last two photos are wheel bays ;) ). More about that when i make something. :-ok
Title: Re: December Group Build - MiG-29
Post by: No.1 on April 22, 2012, 10:54:26 PM
Just note on air intake edges, you stil have two holes
Title: Re: December Group Build - MiG-29
Post by: Sall on April 22, 2012, 11:27:49 PM
Yes,and i don't know how to fix it... Any idea?
If you think on this:
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on April 22, 2012, 11:35:37 PM
Try dabbing a dot of CA glue on the "vee" gap and then holding the airplane nose-down while the glue hardens. This will make the glue flow into the void. After it's hard you can sand/file/trim the glue down and then fill any little imperfections that remain.
Title: Re: December Group Build - MiG-29
Post by: Sall on April 22, 2012, 11:48:14 PM
Thanks for advice! :-flo Tomorow i will try to do that. ;)
Title: Re: December Group Build - MiG-29
Post by: No.1 on April 23, 2012, 06:44:32 AM
You get good advice and spot what to correct, it is on you now :))
Title: Re: December Group Build - MiG-29
Post by: Sall on May 05, 2012, 12:15:58 AM
Finally i sanded wheel bays on MiG-29. ;) I used my new sanding tool :)) and sanding sticks.
(http://www.letletlet-warplanes.com/forum/index.php?action=dlattach;topic=2271.0;attach=46627;image) (http://www.letletlet-warplanes.com/forum/off-road/letletlet-meetings/?action=dlattach;attach=46626;image)
It is pretty smooth and definitely better then before. ;) :-flo
Title: Re: December Group Build - MiG-29
Post by: No.1 on May 05, 2012, 07:02:16 AM
Great!!!
Title: Re: December Group Build - MiG-29
Post by: draken35 on May 05, 2012, 07:21:49 AM
:-ok
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on May 05, 2012, 07:32:17 AM
That is looking great, Sall! They couldn't have put that seam in a worse place could they?
Title: Re: December Group Build - MiG-29
Post by: Sall on May 05, 2012, 12:25:39 PM
Thank you friends! :-flo
Yes Scott,you are definitely right! :-bat :))
Title: Re: December Group Build - MiG-29
Post by: Sall on May 20, 2012, 01:03:32 AM
Here you are very small update. ;)
I fill and sand two "vee" gap on air intake edges with CA glue. ;) And i primed them,so you can better see how it look now. ;)
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on May 20, 2012, 01:54:52 AM
Those turned out very nice!
Title: Re: December Group Build - MiG-29
Post by: No.1 on May 20, 2012, 05:47:08 AM
:-ok
Title: Re: December Group Build - MiG-29
Post by: draken35 on May 20, 2012, 07:03:57 AM
Fine work...
Title: Re: December Group Build - MiG-29
Post by: Sall on May 20, 2012, 12:37:35 PM
Thanks to all of you for advice and comments. :-flo
Title: Re: December Group Build - MiG-29
Post by: Sall on June 25, 2012, 11:59:47 PM
Little update. And little time! :(

Re-scribe again some panels,and added some new... ;)
First pic is OOB and second is with new panels.  :-flo
Title: Re: December Group Build - MiG-29
Post by: No.1 on June 26, 2012, 05:33:29 AM
Glad you did not give up :)
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on June 26, 2012, 07:17:34 AM
 :-clap :-clap :-clap
Title: Re: December Group Build - MiG-29
Post by: Sall on June 26, 2012, 11:02:38 AM
Never!! :)) :-flo
Title: Re: December Group Build - MiG-29
Post by: draken35 on June 26, 2012, 05:11:24 PM
Great work!!!
Title: Re: December Group Build - MiG-29
Post by: Sall on September 30, 2012, 12:46:07 AM
Finally some time!!  :-jump

Today full day work on re-scribing some panels and work on rivets... ;) Tomorrow continue. ;) :-flo
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on September 30, 2012, 02:52:11 AM
Good work! It's nice to see you're able to continue this. :-ok
Title: Re: December Group Build - MiG-29
Post by: draken35 on September 30, 2012, 11:34:03 AM
Well done, Sall!!! :-ok
Title: Re: December Group Build - MiG-29
Post by: No.1 on September 30, 2012, 11:41:55 AM
Nice to see you back :))
Title: Re: December Group Build - MiG-29
Post by: Ernie on September 30, 2012, 11:59:38 AM
Great job on the scribing and rivets Sall! :-ok
Ernie
Title: Re: December Group Build - MiG-29
Post by: Sall on September 30, 2012, 01:49:25 PM
Thank you friends!!!! :-flo :-flo Your support means me a lot! ;) :-flo :-flo

Today i continue! :-jump
Title: Re: December Group Build - MiG-29
Post by: Sall on October 18, 2012, 10:23:07 PM
This is my "today"... :-wall :-wall

Anyway, today, work on rivets. Everything is finished, and i'm satisfied. This is first time i use riveter, first time i make rivets,so... It is not SO bad! :))

Continue with assembly these days. ;) :-flo
Title: Re: December Group Build - MiG-29
Post by: No.1 on October 18, 2012, 10:34:17 PM
:-ok
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on October 19, 2012, 07:04:53 AM
Looking great!
Title: Re: December Group Build - MiG-29
Post by: draken35 on October 19, 2012, 05:26:13 PM
:-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on October 19, 2012, 06:11:34 PM
Thanks friends!! :-flo :-flo
Title: Re: December Group Build - MiG-29
Post by: Sall on November 23, 2012, 12:33:10 PM
Hi friends! :-flo

Finally i have some time for modeling, and here you are some progress... :-jump

I decided to work today on wheel bays. I will do some enrichment in wheel bays.  ;) :-flo
First thing that i do is apply Vallejo Black Surface Primer. Image from 1st to 3rd is before primer, image from 4th to 6th is first coat of primer, and image from 7th to 10th is second and final coat of primer in wheel bays. I'm waiting for it to dry everything, then i will apply few coat of paint, and then i go to wires, pipes, some instruments etc.  :-tri :-jump

More progress later today. Stay tuned! :-tri :-flo

Title: Re: December Group Build - MiG-29
Post by: No.1 on November 23, 2012, 12:48:32 PM
Nice too see you back :))
Title: Re: December Group Build - MiG-29
Post by: Sall on November 23, 2012, 03:41:02 PM
As i said, more progress today... :-jump :-flo

I start with painting of wheel bays!
First painted wheel bays with mixture of Hu127 and Hu11 (both acril) - from 1st to 4th images, and then use Hu127 (enamel) - from 5th to 9th image. ;)
I tried to get effect of worn paint, and i thing that i managed to get it. ;) What is your oppinion? :-flo :-think

Here you are images of real plane:
Front wheel bay:
(http://www.letletlet-warplanes.com/forum/index.php?action=dlattach;topic=2423.0;attach=50478;image) (http://www.letletlet-warplanes.com/forum/borbene-letelice-combat-warplanes/mig-29ub-301-102-108-serbian-air-force-walkaround/?action=dlattach;attach=50477;image) (http://www.letletlet-warplanes.com/forum/index.php?action=dlattach;topic=2423.0;attach=50472;image) (http://www.letletlet-warplanes.com/forum/borbene-letelice-combat-warplanes/mig-29ub-301-102-108-serbian-air-force-walkaround/?action=dlattach;attach=50471;image)

Back wheel bays:
(http://www.letletlet-warplanes.com/forum/index.php?action=dlattach;topic=2423.0;attach=50514;image) (http://www.letletlet-warplanes.com/forum/borbene-letelice-combat-warplanes/mig-29ub-301-102-108-serbian-air-force-walkaround/?action=dlattach;attach=50513;image) (http://www.letletlet-warplanes.com/forum/index.php?action=dlattach;topic=2423.0;attach=50518;image) (http://www.letletlet-warplanes.com/forum/borbene-letelice-combat-warplanes/mig-29ub-301-102-108-serbian-air-force-walkaround/?action=dlattach;attach=50517;image)

Off course there will be more dirty later, but this is my try to get effect of worn paint. ;)

Title: Re: December Group Build - MiG-29
Post by: draken35 on November 23, 2012, 06:22:27 PM
:-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on November 24, 2012, 01:06:37 AM
Last update for today. :-jump

I have done front wheel bay! It is all done. :-flo Later, during process of build i will apply some dirty in wheel bays.
These days i will work on back wheel bays! ;)
Stay tuned.  :-jump :-flo
Title: Re: December Group Build - MiG-29
Post by: No.1 on November 24, 2012, 02:32:18 AM
It look like all join lines are perfect :-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on November 24, 2012, 02:43:04 AM
Glad to hear that!! :-flo :-ok
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on November 24, 2012, 03:34:10 AM
Great work!!!!! Good to see you are able to spend some time on this beauty.
Title: Re: December Group Build - MiG-29
Post by: Sall on November 24, 2012, 01:20:49 PM
Thank you mate!! :-flo
Title: Re: December Group Build - MiG-29
Post by: draken35 on November 24, 2012, 08:04:41 PM
:-ok

Comes fine...
Title: Re: December Group Build - MiG-29
Post by: Sall on November 25, 2012, 02:38:29 PM
Thanks!! :-flo :-flo
Title: Re: December Group Build - MiG-29
Post by: Sall on January 27, 2013, 12:44:48 AM
Hi friends!! :-wave

Little time these days. Exams on my college!! :-/

Tonight i decided to fix two little problems that cut my eye!
-First two images - i fill this two panels with super glue, when dry, i will sand it and scribe new panels. As you can see, this two panels need to have a square shape, and mine panels don't have a square shape! :)) :-wall I think that for this things, super glue is much better choice then the classic filler, because these panels are very tine, and with super glue i will avoid the cracking during scribing a new lines. ;)

-Second two images - i cut a little piece of this button-lever. They were too long, and cut my eye definitely!! So now is ok! :) :-flo

This is everything for tonight, it's little i know, but better something then nothing! :)) One step closer to finish! :-flo
Title: Re: December Group Build - MiG-29
Post by: No.1 on January 27, 2013, 07:06:04 AM
Scribing template have to be used for shapes like that ;)
Title: Re: December Group Build - MiG-29
Post by: Sall on January 27, 2013, 11:30:00 AM
Will try to do something! ;)
Title: Re: December Group Build - MiG-29
Post by: draken35 on January 27, 2013, 12:30:05 PM
Good work anyway... ;)
Title: Re: December Group Build - MiG-29
Post by: Sall on January 27, 2013, 02:38:04 PM
Thank you mate!! :-flo

Now i need to think how to solve problem about scribing these two panels and template! :-think
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on January 27, 2013, 03:31:08 PM
Good to see you moving forward here, mate!

Eduard makes a great set of templates for such panel lines. I only just acquired these templates lately and they work GREAT!
Title: Re: December Group Build - MiG-29
Post by: Sall on January 27, 2013, 04:56:04 PM
Thanks!! :-flo

Definitely i need to order one!! :-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on January 30, 2013, 03:37:06 AM
Hi friends! :-wave Here i am, and my progress! :-jump

Today i work on enrichment wheel bay. ;)

-First two images are sanded super glue from panels. I needed to correct a little panel lines and rivets around this areas but nothing special. ;) I agreed with Srecko to use his scribe template. :) Thanks mate!! :-flo :-flo

-Second four images are work on plane's right wheel bay. This is not finished, need more work tomorrow, and hope tomorrow i will finished will both bays. ;)

This is everything for tonight!  :-flo
Title: Re: December Group Build - MiG-29
Post by: No.1 on January 30, 2013, 07:58:25 AM
Good ;)
Title: Re: December Group Build - MiG-29
Post by: draken35 on January 30, 2013, 05:06:43 PM
:-ok
Title: Re: December Group Build - MiG-29
Post by: Sall on January 30, 2013, 06:52:01 PM
Here you are more progress today.  :-wave

I finished(for now) right wheel bay. ;) More wires will be added when i put kit on his legs! :)

Progress on left wheel bay you can expect probably tomorrow. ;) :-flo
Title: Re: December Group Build - MiG-29
Post by: No.1 on January 30, 2013, 07:12:01 PM
A lot of tiny work...
Title: Re: December Group Build - MiG-29
Post by: draken35 on January 30, 2013, 07:31:55 PM
Nice details!
Title: Re: December Group Build - MiG-29
Post by: Sall on January 30, 2013, 07:37:01 PM
Thank you friends!! :-flo :-flo

Srecko, you are right, a loooot of tiny details! And need more work in final stage of assembly! :)
Title: Re: December Group Build - MiG-29
Post by: Second Air Force on January 30, 2013, 10:41:17 PM
 :-clap :-clap :-clap
Title: Re: December Group Build - MiG-29
Post by: Sall on January 31, 2013, 12:27:48 AM
Thank you mate!! :-flo