December Group Build - MiG-29

[No.1]

I use two of them, first liquid and another is standard...

[Sall]

What standard??

[No.1]

Best possible

[Sall]

 

[draken35]

For putty: better Italeri or Tamiya, or Squadron.
You can also try to use your Humbrol putty diluted with a little bit of aceton...
 You can also make your own (excellent) filler: put some sprue parts into an old liquid cement. That give a kind of paste that you can apply with a toothpick and then sand easily.

for big gaps I would use miliput.

[Sall]

I will try to find Italeri putty. I work with it before this Humbrol,and it was excellent! I was very satisfied with it.
If i don't find,i will see what to do. Thanks for help. I will use something from this.

You can also try to use your Humbrol putty diluted with a little bit of aceton...

I tried. Believe me, it become worse then without acetone. Italeri putty works excellent with acetone.

[Sall]

Little progress... I glue air intake with fuselage,and there are big holes,and deep lines..
I need to buy some good putty this days,so i can start work on solving this problems. Also i have to made some tool for sanding putty inside of wheel bay. It is very difficult to access there. I will use also this:

When i finished that,i will put some wires inside of wheel bays. True is that very little of that can be seen,but it will be for my soul.  
Here you are images of glued air intake and fuselage,also images of holes and lines...

[No.1]

Go ahead mate, this will be nice when you complete it

[Second Air Force]

That seam is really, really in a difficult spot, Sall!

Another option on filler would be to find an automotive body shop or auto parts store and get some "spot filler". It is basically a paste form of red oxide primer and works very well.

Can't wait to see your next update!

[draken35]

Nice work anyway...

[Sall]

Thanks friends!!
I will try to solve this problem this days...

[Sall]

I work little on MiG-29.
Until i'm waiting putty,i decided to fill little this holes and lines with glue in gel. I use:

And here you are photos. I fill little this holes,because i think that it is better to put something inside before putty.
You will not see anything special,because when this glue dry,he is transparent/clear.

[No.1]

It is good also to make provisional filler with mix of this cement with powder like graphite powder, chalk powder or what you have available.

[Sall]

Thanks for advice... I will try to think something,and use some of advice that you mentioned me on Facebook..

[No.1]

You are welcome Use this board as main area for conversation please