Author Topic: TAM 4500 DV  (Read 11734 times)

Offline modellius

  • Sr. Member
  • ****
  • Posts: 2520
    • View Profile
TAM 4500 DV
« on: January 12, 2023, 07:04:34 PM »
This truck was made in former Yugoslavia, it has it use in military and in civil purposes as well. It was made in TAM factory ( Tvornica Avtomobilov Maribor, now Slovenia ) and it was an Magirus-Deutz design produced by lycence. It has 4 cylinder air cooled diesel engine 85 Hp, it could carry 4.5 tons load on road and 2.5 tons off road, it has all wheel drive. There was many variants of this truck made ( variants such as 2x4 and with many different carrier variants, later on with V6 engine ) this model is build mostly for military with a winch mounted in front.



This is testing of TriglavModels resin 3D printed kit, 1/35 scale, by this I would like to thank TriglavModels for provided model.



First I started with chassis, after cleaning started the build. It need a lot of dry fittings, have to pay a lot of attention to be sure of parts gluing place, I suggest you go only one at the time, but the parts are surprisingly good fitting ( well designed ). Due to accuracy the parts are very thick and fragile, I learned on the hard way, managed to broke a few pieces but nothing too bad, all easy repair ( my fault, didn't pay attention on manufacturer warning about this... )



Here is the progress so far

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23092
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: TAM 4500 DV
« Reply #1 on: January 13, 2023, 10:20:34 AM »
Good to see it, so Triglav is still alive? They contact me many years ago, the need some data about M-60 armor vehicle.

Offline draken35

  • Moderator
  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: TAM 4500 DV
« Reply #2 on: January 16, 2023, 09:44:45 AM »
:-ok

Offline modellius

  • Sr. Member
  • ****
  • Posts: 2520
    • View Profile
Re: TAM 4500 DV
« Reply #3 on: January 20, 2023, 05:25:49 PM »
Thank you !

The chassis is done, I only added a few pipes made of brass wire of my own  ( except the exhaust pipe, it's given in the set as brass wire only job was to cut it on size, measures are given in the instructions ) the only " big " scratch are the cardan shafts, they were not in the test speciment of the kit but will be provided in kit. About the kit I can say so far so good

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23092
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: TAM 4500 DV
« Reply #4 on: January 20, 2023, 06:17:16 PM »
Detailed work at all

Offline draken35

  • Moderator
  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: TAM 4500 DV
« Reply #5 on: January 20, 2023, 07:15:40 PM »
:-ok

Offline modellius

  • Sr. Member
  • ****
  • Posts: 2520
    • View Profile
Re: TAM 4500 DV
« Reply #6 on: January 31, 2023, 12:39:03 AM »
Thank you friends !

The chassis had it basic paint, there was two types of painting on these trucks. There was military olive and black, this time I go with the black to made a little contrast on this vehicle. Exhaust paint and weathering is still to come. The cab is completed, painted and weathered, assembly is the next step

Offline draken35

  • Moderator
  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: TAM 4500 DV
« Reply #7 on: January 31, 2023, 09:19:55 AM »
:-ok

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23092
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: TAM 4500 DV
« Reply #8 on: January 31, 2023, 12:08:13 PM »
I see this will look like real!!

Offline modellius

  • Sr. Member
  • ****
  • Posts: 2520
    • View Profile
Re: TAM 4500 DV
« Reply #9 on: February 17, 2023, 01:23:01 AM »
Thank you for your kind words friends !

The basic paint on the cab is on, some fine touches are still needed and the weathering is still to come....

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23092
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: TAM 4500 DV
« Reply #10 on: February 17, 2023, 05:07:16 AM »
So good color match!! And this progress fast, nice to see that ;)

Offline draken35

  • Moderator
  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: TAM 4500 DV
« Reply #11 on: February 17, 2023, 07:32:26 AM »
Very nice !

Offline modellius

  • Sr. Member
  • ****
  • Posts: 2520
    • View Profile
Re: TAM 4500 DV
« Reply #12 on: March 07, 2023, 08:08:09 PM »
Thank you friends !

The cab is now weathered and dusted, now it looks to me more like a barn find not and vehicle in use, I think I overdone the dust but it stays now at it is....But I like it actually

Offline No.1

  • Administrator and Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 23092
  • Owner: www.letletlet-warplanes.com
    • View Profile
    • LetLetLet - Warplanes
Re: TAM 4500 DV
« Reply #13 on: March 08, 2023, 05:17:17 AM »
A week on terrain and it definitely look like that- good work!!

Offline draken35

  • Moderator
  • Hero Member
  • *****
  • Posts: 8724
    • View Profile
Re: TAM 4500 DV
« Reply #14 on: March 08, 2023, 10:08:28 AM »
:-ok